MOXA NPort 5130 Serial Server Serial Device Server 10/100Mbps Ethernet with One-Port RS-422/485
Features:
- Small size and easy installation
- Real COM/TTY driver for Windows and Linux
- Standard TCP/IP interface supports multiple modes of operation
- Easy-to-use tool (for Windows) for configuring multiple device servers
- SNMP MIB-II is used for network management
- Configure via Telnet, web browser or tools for Windows
- The pull-up/pull-down resistor of the RS-485 port can be adjusted
Specifications:
Ethernet Interface:
- Number of Ports: 1
- Speed: 10/100 Mbps and adaptive MDI/MDIX
- Connector: 8-pin RJ45
- Magnetic Isolation Protection: 1.5 KV built-in
Serial Interface:
- Number of Ports: 1
- Serial Standards: NPort 5130: RS-422/485
- Connector: DB9 male
- RS-485 Data Direction Control: for ADDC (automatic data direction
control)
- RS-485 pull-up/pull-down resistors: 1kΩ, 150kΩ
Serial Communication Parameters:
- Data Bits: 5, 6, 7, 8
- Stop Bits: 1, 1.5, 2
- Parity: None, Even, Odd, Space, Mark
- Flow Control: RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
- Baud-rate: NPort 5130: 50 bps to 921.6 Kbps
Serial Signals:
- RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422: Tx+, Tx-, Rx+, Rx-, GND
- RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w: Data+, Data-, GND
Software:
- Network Protocols: ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, ARP, HTTP, SMTP
- Configuration: for Web Console, Telnet Console and Windows Utility
- For Windows Real COM drivers: For Windows 95/98/ME/NT/2000, Windows XP/2003/Vista /2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0 and Windows XP Embedded
- Fixed TTY drivers: For SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i and Mac OS X
- For Linux Real TTY Drivers: For Linux 2.4.x, 2.6.x, 3.x
Physical Characteristics:
- Housing: Metal
- Weight: 340g (0.75 lb)
- Dimensions: Without ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in). With ears: 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in)
Environmental Limits:
- Operating Temperature: NPort 5130: 0 to 55°C (32 to 131°F)
- Storage Temperature: -40 to 75°C (-40 to 167°F)
- Operating Humidity: 5 to 95% RH (without condensation)
Power Requirements:
- Input Voltage: 12 to 48 VDC
Power Consumption:
- NPort 5130: 200 mA at 12 V
Safety Certification:
- Safety: UL 60950-1
- EMC: EN 55022/24
- EMI: CISPR 22, FCC Part 15B Class A
- EMS: IEC 61000-4-2 ESD: Contact: 4kV; Air: 8kV. IEC61000-4-3 RS:80MHz-1GHz: 3V/m. IEC 61000-4-4 EFT: Power supply: 1kV; Signal: 1kV. IEC 61000-4-5 Surge: Power supply: 1kV. IEC61000-4-6 CS: 150kHz-80MHz: 3V/m; Signal: 3V/m. IEC 61000-4-8 PFMF. IEC 61000-4-11 DIPs
Reliability:
- Automatic-restart trigger: Built-in WDT
MTBF (meantime between failures):
- NPort 5130: 2,836,863 hours
- Standard: For Telcordia (Bellcore) Standard TR/SR
Warranty:
- Warranty Period: 5 years
Package Included:
- 1 x NPort 5130 Serial Server