| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $44.98 | $44.06 | $42.69 | $40.85 | Contact US |
GDX8000 Gold Detector 8-Meter Depth Outdoor Treasure Hunter Equipment LCD Display 0.5W Metal Detector
$834.17
ALIENTEK DL16 Plus 1GHz Mini Logic Analyzer ARM FPGA STM32 Debugger Protocol Decoding with 28PCS S+L Spacing Hook Clip
$144.94
ALIENTEK DL16 Plus 1GHz Mini Logic Analyzer ARM FPGA STM32 Debugger Protocol Decoding with 18PCS Large Spacing Hook Clip
$135.38
MS2600 3999 Open Jaw Clamp Meter Compared with Fluke
MS2600 is an open jaw digital electrical tester. There are DCV, ACV, ACA, Ω, CAP, frequency, diode test, continuity test and duty cycle test function. Moreover, there are auto and manual range, relative measurement, data hold, and backlight auto off time limit mode. Test leads can be REPLACEed on groove of back of the tester.
Specifications:
- Meets IEC1010-1 concerning safety requirements
- Display: 3999 counts
- DCV: 4/40/400V±0.7%, 1000V±0.8%
- ACV: 4/40/400V±0.8%, 700V±1.0%
- ACA: 200A±3.0% (50Hz to 400Hz)
- Resistance: 400/4k/40k/400k/4MΩ±1.2%, 40MΩ±2.0%
- CAP: 40n/400n/4µF±4.0%
- Frequency: 10Hz to 100kHz±2.0%
- Duty cycle: 0.1% to 99.9%
- Back light
- Power: Battery 6F22 (9V) x 1
- Size: 192mm x 68mm x 43mm
- Weight: Approx. 230g
|
DC Voltage |
||
| Range | Resolution | Accuracy |
| 0- 4V | 1mV | +- 0.7% of reading +- 1 digit |
| 4- 40V | 10mV | |
| 40- 400V | 0.1V | |
| 400- 1000V | 1V | +- 0.8 % of reading +- 3 digits |
|
Input impedance : 10M Ohms Overload protection:1000V DC or 700 AC RMS |
||
|
AC Voltage |
||
| Range | Resolution | Accuracy |
| 0- 4V | 1mV | +- 0.8 % of reading +- 5 digits |
| 4- 40V | 10mV | |
| 40- 400V | 0.1V | |
| 400- 700V | 1V | +- 1.0 % of reading +- 10 digits |
|
Input impedance: 10 M Ohms
Frequency Range : 40 Hz to 400 Hz Overload protection:1000V DC or 700 AC RMS |
||
|
AC current |
||
| Range | Resolution | Accuracy |
| 0 - 200A | 0.1A | +-3.0 % of reading +- 3 digits |
|
Overload protection: 240A for 60 seconds Max.
Frequency range: 50 Hz to 500 Hz |
||
|
Resistance |
||
| Range | Resolution | Accuracy |
| 0- 400 Ohm | 0.1 Ohm | +-1.2 % of reading +- 1digits |
| 4K Ohm | 1 Ohm | |
| 40K Ohm | 10 Ohm | |
| 400K Ohm | 0.1K Ohm | |
| 4M Ohm | 1 K Ohm | |
| 40 M Ohm | 10 K Ohm | |
| Overload protection: 250V DC or rms ac for all ranges. | ||
|
Capacitance |
||
| Range | Resolution | Accuracy |
| 0- 40 nF | 10pF | +- 4.0 % of reading +- 10 digits |
| 400 nF | 0.1nF | |
| 4uF | 1nF | |
| 40uF | 10nF | |
| Overload Protection: 250 V DC or rms. AC for all ranges. | ||
|
Frequency Measurement |
||
| Range | Resolution | Accuracy |
| 0- 40 Hz | 0.01HZ | +- 2.0 % of reading +- 1 digits |
| 400 Hz | 0.1Hz | |
| 40 KHz | 1 Hz | |
| 100KHz | 0.1KHz | |
| Measurement range: 1V to 10V RMS, 10 Hz to 100KHz | ||
|
Audible continuity and diode |
||
| Buzz | If continuity exits ( less than 30 Ohm), built in buzz with sound | |
| Diode | Show approx forward voltage of the diode | |
| Duty Cycle | 0.1 % 99.9 % | |
| Power off | 30 minutes after , it shuts itself off when no operation. | |
