| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $4.82 | $4.72 | $4.58 | $4.38 | Contact US |
Waveshare ESP32-S3 Development Board ESP32-S3R2 GEEK 1.14-inch LCD ST7789 for USB Dongle Support 2.4GHz WiFi BLE5
$17.68
M5Stack M5GO IoT Starter Kit V2.7 High Performance IoT Start Development Kit ESP32 2-inch IPS Screen for Arduino
$96.24
M5Stack Glass2 Unit 1.51-inch Transparent OLED Extended Screen Unit for SSD1309 Driver Solution
$34.22
PL2303HX USB to TTL Converter Module Download Cable 5V & 3.3V Output for STC Single Chip
Introduction:
- This PL2303HX USB to TTL converter module is a must for simple serial communication. Electronic lovers can use the USB signal turn TTL signal and allows you to upgrade the firmware of your router or ADSL modem. This module supports 3.3V and 5V output.The red led indicate the power supply while the green one means the RX and TX communication. Also, this module supports STC MCU and STM32F103 series MCU
Specifications:
- Easy serial communication
- All kinds of satellite set-top box upgrade
- Upgrade your router or ADSL modem's firmware
- Simplify connections: RX to TX or TX to PX of an MCU. Then connect your GND, without the need for MAX232
- GPS serial communication
- Simple serial communication, super terminal of the commonly used in serial port debug tool
- And write STC SCM, NXP SCM, renesas microcontroller, NEC microcontroller, etc
- Cell phones, XBOX360, GPS serial communication, auto detection, DVD flash, etc
- The router, hard disk, ADSL, broadband cat the firmware update or crack upgrade
Package Contents:
- PL2303HX USB to TTL converter x1
