Portable Transwin Q8 Lossless Bluetooth Wireless Music Audio Receiver Adapter HIFI Stereo Speaker for iPhone Android

Portable Transwin Q8 Lossless Bluetooth Wireless Music Audio Receiver Adapter HIFI Stereo Speaker for iPhone Android

Description:
- Wireless music bluetooth receiver, remote transmission (10m)
- TF Card player, supports 32G capacity at most
- Built-in lithium battery, provides 24-hour endurance

Operation Instructions:
- Adapter type: Wireless Bluetooth audio adapter (it cannot be used solely and shall be used with speakers)
- Input mode: 3.5mm stereo, TF card, Bluetooth
- Bluetooth version is V4.0, and if the version is low, please input pairing code ‘0000' to perform butt joint
- Power supply mode: USB charging, built-in 3.7V, 370mA polymer battery
- TF card model decoding support nondestructive music formats: APE/FLAC/WAV/WMA/MP3...etc.  The play sequence of TF card is based on the time order
- Pairable audio: PC/iPhone/iPod/Mobile phone/Bluetooth function product
- Function setup: Bluetooth (default), TF card, AUX IN
- Under the conditions without connecting and playing Bluetooth, it will enter into sleep mode after 8 minutes, stand-by current: 1uA
- After connecting with the speaker, press the power switch on the top, the machine will send the voice prompt: Allies has been turned on, enter into Bluetooth and wait for the connection, search for the name of Allies in the Bluetooth device and choose to pair.
- When connecting the device to the Bluetooth-supported products, the speaker will send prompt: successful Bluetooth connection, then you can play music
- Startup & shutdown: long press the POWER key within 3-5 seconds
- LINE IN mode: insert 3.5mm audio line to the jack, which means that it enters into audio input play mode, connect the speaker so that it can send music via the device

The condition instructions of Red, Blue, Yellow, Green light:
- Red light: charging mode, plug into PC power source, the Red light is on; and after the power is in saturation, the Red light will be off
- Blue light: Bluetooth mode, it will flicker once within 0.5 seconds in matching conditions; in Bluetooth on-line state, it will flicker twice within 5 seconds
- Yellow light: TF Card mode
- Green light: AUX input mode

Charging function:
When plugging the USB data cable, the device can be connected to the computer. If the red light is on, you can charge the adapter. (The complete charging time is about 2 hours, while the standby time is about 30 hours)

Specification:
- Bluetooth: 4.0
- Output sensitivity: 600mV
- Bluetooth distance: 10m
- SNR: >=90DB
- Charging current: 250mA
- Battery: 370mAH
- Frequency response: 120Hz-18Khz
- Distortion: <=0.05%

Package included:
- 1 x Receiver
- 1 x Charging cable
- 1 x Audio cable
- 1 x Adapter