Proxmark3 RDV PM3 RDV2 RFID Copier RFID Cloner Open Source Development Board Kit For IC ID Cards

Proxmark3 RDV PM3 RDV2 RFID Copier RFID Cloner Open Source Development Board Kit For IC ID Cards

Features:
- Super compatibility. Crack more than 98% of the cards on the market. Suitable for ID and IC cards such as water cards, elevator cards, access control cards, etc.
- Upgraded chip, intelligent protection system, built-in integrated antenna, support one-click cracking, import analysis function and anti-shielding writing
- The third-generation imported chip can be cracked and cloned and compatible with 98% of IC/ID cards. Can read 125K, 134K, 127K low frequency cards and 13.56k high frequency cards
- Proxmark3 RDV (PM3 RDV2) is an upgraded full version of PM3 EASY version. It supports UHF and UHF with a wider range
- It has undergone 58 designs, 236 upgrade tests and 5 factory inspections
- Refresh any version as needed. Sniffing, reading, cloning and copying operations for RFID developers
- Support high-frequency cards and low-frequency cards. Support dual frequency, power supply high line detection. Support hardnested instructions, effective cracking
- Detachable antennas for easy carrying and convenient application

Product Parameters:
Basic Parameters:
- Model: PM3 RDV2
- Working voltage: 3.5-5.5V
- Working current: 50-130mA
- Length and width dimensions: 44 x 85.6mm/1.7 x 3.4"
- Product color: black
- Thickness size: 6.2mm/0.2" (the thinnest); 9.8mm/0.4" (with screws); 15.8mm/0.6" (with low frequency antenna)
- Factory firmware version: 2.0.0

Other Parameters:
(When the low-frequency antenna is installed on the right side)
# LF ANTENNA: 29.84V at 125.00KHZ
# LF ANTENNA: 32.31V at 134.00KHZ
LF OPTIMAL: 35.39V at 127.66KHZ
#HF ANTENNA: 28.43V at 13.56MHZ

(When the low-frequency antenna is installed on the left side)
# LF ANTENNA: 29.84V at 125.00KHZ
# LF ANTENNA: 32.31V at 134.00KHZ
LF OPTIMAL: 35.39V at 127.66KHZ
# HF ANTENNA: 28.43V at 13.56MH

Proxmark3 Description:
Proxmark3 is an open source hardware, which is mainly used for RFID sniffing, reading and cloning.

Proxmark3 Smart Tool:
Promark3 Smart Tool is a simplified and integrated redesign specifically for Proxmark3. It pays more attention to practicality, operability, and retains all original functions.

Proxmark3 Hardware:
- Immersion gold craft and SMT
- Original chips and brand components. Capacitors and resistors are branded, such as for Murata
- Antennas are accurately matched, and special tooling is used for antenna testing

Operation Files & Materials:
- Provide IC/D card cloning tutorial, cracking tutorial, card simulation tutorial and sniffing tutorial
- Provide original software firmware
- Quick user manual
- Provide operation videos for learning

Integrated Operation Interface:
- Provide command line operation
- Provide the original English version of GUI operation interface
- Provide Chinese GUI operation interface
- Support interfaces in Chinese and English

Package Included:
- 1 x Set of Proxmark3 RDV