SallyBox Mini Arcade Controller Fight Stick Game Controller w/ RGB LED Switches Key Caps for Hitbox

SallyBox Mini Arcade Controller Fight Stick Game Controller w/ RGB LED Switches Key Caps for Hitbox

Read before Purchasing:
Because it is a DIY item, there may be some minor imperfections, including but not limited to scratches, fingerprints, bump marks and dust particles. Please make sure that you don't mind before purchasing. Thank you!

Features:
- SallyBox game controller with lights
- 1ms delay and a display screen display
- Small and portable
- It supports multiple platforms
- Last input priority is supported for SOCD mode
- Panel patterns can be customized
- With the same layout for Hitbox, it is comfortable to use and suitable for most players
- With a mapping switch button
- Fine edge and round corner
- Switches with pads: The pads can filter some high-frequency noises. Used with silent switches, they work even better
- All the buttons support hot-swappable MX switches. They are compatible with over 99% of MX switches on the market and 5-pin switches
- With a type-c port on its left side
- The functions of all the buttons can be changed in settings
- It can display in fixed color mode, rainbow mode and color chasing mode. Colors, color themes and color modes can be switched
- Small size: 196 x 123 x 18.5mm/7.7 x 4.8 x 0.7" (LxWxH) (including feet pads)

Input Mode:
To select input mode, hold one of the following buttons when plugging in the controller:
● 1P - for PS3/DInput
● 1K - NS
● 2K - PC/XInput

Direction Mode:
After plugging in the controller, please press:
● SELECT + START + DOWN: DP mode (Visual helmet mode)
● SELECT + START + LEFT: LS (Left analog stick)
● SELECT + START + RIGHT: RS (Right analog stick)

Invert Y-Axis of Direction Keys:
Press the following buttons after plugging in the controller:
● HOME + START + RIGHT: switch Up and Down

SOCD Mode:
After plugging in the controller, select the active SOCD mode by pressing the following buttons:
● HOME + START + DOWN: Neutral (Up+Down=Neutral; Left+Right=Neutral)
● HOME + START + UP: Up Priority (Up+Down=Up; Left+Right=Neutral)
● HOME + START + LEFT: Last input priority

Turbo Mode:
Press and hold the TURBO button and press the button you want to set up continuous shooting. After setting, you can cancel rapid firing with the same operation.
● It can be set to 1P, 2P, 3P, 4P, 1K, 2K, 3K and 4K.
● Firing rate can be adjusted from 1 to 60 times per second (individual speed adjustment for each button is not supported. The speed supported by the V0.5.3 firmware is 1-30 times).
● Press and hold the TURBO button and press the UP key to increase the rate of fire. Press and hold the TURBO button and press the DOWN key to reduce the rate of fire.
● Even if the power is turned off, the set firing rate will be saved in the previous state, but the state of the TURBO button will be cleared.

RGB LED:
If you wan to change the setting of LEDs, please press:
● SELECT + START + 1P: The next animation
● SELECT + START + 1K: The previous animation
● SELECT + START + 2P: Increase brightness
● SELECT + START + 2K: Reduce brightness
● SELECT + START + 3P: LED parameter +
● SELECT + START + 3K: LED parameter -
● SELECT + START + 4P: Color parameter +
● SELECT + START + 4K: Color parameter -

Package Included:
- 1 x Gaming Controller

Note:
- Switches and key caps are included. It is ready to use.
- Please contact us to pay the cost of pattern customization.