SG-3000-PRO 25MHz-3GHz Handheld RF Signal Generator Portable Signal Source Amplitude 0.5DBm 1Hz

SG-3000-PRO 25MHz-3GHz Handheld RF Signal Generator Portable Signal Source Amplitude 0.5DBm 1Hz

Description:
The signal frequency range of the RF signal source is 25MHz~3GHz. Its power dynamic range is -51.5dBm to 10dBm.

Its frequency and power are adjustable. It can be used to test radio frequency amplifiers, switches, filters, interference, etc.. And it can also be used for wireless communication and radio frequency circuit research and development.

Main Functions:
- 25MHz to 3GHz, -51.5dBm to 10dBm
- CW and sweep frequency

Recommended Application:
- It can be used in research and development of radio frequency circuit such as radio frequency amplifier test, RF transceiver test, filter test, etc., which can effectively improve work efficiency, reduce carrying burden, and improve the quality of works.

Technical Parameters:
Frequency:
- Frequency range: 25MHz to 3GHz
- Frequency resolution: ≥ 1Hz

Power:
- Power: -51.5dBm to 10dBm
- Power resolution: ≥ 1dBm

Wavebands:
- Band 1: f ≤ 23.4375MHz
- Band 2: 23.4375MHz <f ≤ 46.875MHz
- Band 3: 46.875MHz <f ≤ 93.75MHz
- Band 4: 93.75MHz <f ≤ 187.5MHz
- Band 5: 187.5MHz <f ≤ 375MHz
- Band 6: 375MHz <f ≤ 750MHz
- Band 7: 750MHz <f ≤ 1500MHz
- Band 8: 1500MHz <f ≤ 3000MHz
- Band 9: 3000MHz <f ≤ 6000MHz
- Band 10: 6000MHz <f ≤ 12000MHz

Sweep Frequency:
- Scan mode: step scan (equal interval frequency step)
- Scan mode: continuous
- Scan range: within the frequency range of the instrument
- Step change: linear
- Dwell time: 20ms to 100s

Spectral Purity:
- Harmonics: 25MHz ≤ f ≤ 500MHz, output level ≤ +0dBm; 500MHz ≤ f ≤ 1000MHz, output level ≤ +0dBm; 1000MHz ≤ f ≤ 2000MHz, output level ≤ +0dBm; 2000MHz ≤ f ≤ 3000MHz, Output level ≤ +0dBm
- Subharmonics: 25MHz ≤ f ≤ 500MHz; 500MHz ≤ f ≤ 1000MHz; 1000MHz ≤ f ≤ 2000MHz; 2000MHz ≤ f ≤ 3000MHz
- Non-harmonic: 25MHz ≤ f ≤ 500MHz; 500MHz ≤ f ≤ 1000MHz; 1000MHz ≤ f ≤ 2000MHz; 2000MHz ≤ f ≤ 3000MHz
- Single sideband phase noise: f = 100MHz; f = 1GHz; f = 3GHz; f = 6GHz

General Technical Specifications:
Display:
- Type: TFT LCD
- Resolution: 800x480
- Screen size: 5"

Power Supply:
- Battery capacity: 3300mAh (typical)
- Battery type: 18650 lithium battery for Panasonic
- Charging time: 2～3 hours
- Time duration: 1～2 hours

Size:
- Dimensions: 135 x 101 x 30mm/5.3 x 4 x 1.2" (excluding the sizes of knob and antenna)

Environment:
- Working temperature: -20 to 45℃
- Storage temperature: -20 to 70℃
- RF interface: SMA-K
- Built-in RTC clock: support

Interface:
- RF interface: SMA-K
- Charging interface: Micro USB interface

2.4G Omnidirectional Antenna:
- Frequency range.: 2.4-2.5 GHz
- Standing wave ratio: ≤1.5
- Gain: 6 dBi
- Characteristic impedance: 50 ohm
- Interface: SMA-J

5V Power Adapter:
- 5V 2A

Package Included:
- 1 x Signal Generator Host
- 1 x Charger (Power Adapter)
- 1 x Antenna
- 1 x User Manual

Acceptance of the Instrument:
- Please check whether the items are complete according to the above list and whether there is any appearance damage. Pick up the signal source host, check whether the screws are firm, and whether there is any abnormal noise when shaking.
- If no abnormality is found in the general inspection, the charger should be connected to check whether the power-on is normal. If the battery has been installed, directly press the power switch (POWER, PWR) for 0.5 seconds to start the inspection.

Safety Precautions:
- It is not a consumer product, and users must be a professional or with professional knowledge.