•  SKYRC Toro TS 50A ESC BrushlessRegler Sensored Speed Controller für 1/10 RC Buggy

SKYRC Toro TS 50A ESC BrushlessRegler Sensored Speed Controller für 1/10 RC Buggy

Availability: Out Of Stock

  • Price:$42.74
  • Price in reward points: 427 Reward Points: 4
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $41.89 $41.03 $39.75 $38.04 Contact US
Quantity:

 SKYRC Toro TS 50A ESC BrushlessRegler Sensored Speed Controller für 1/10 RC Buggy

Specifications:

  Size
  Constant/Burst Current   50A/300A
  Motor Compatible   Brushless Sensor & Sensorless ESC
  Car Compatible   1/10 Buggy and Touring Car
  Motor Limits   4-6S NiMH or 2S LiPo--≥8.5T(1/10 Touring Car),≥11.5T(1/10 Buggy)
  Resistance   0.0006ohm
  Battery Cell Count   4-6S NiMH or 2S LiPo
  BEC Output   6V@2A
  Weight   60g
  FAN   Optional part
  REMARK: All the testing results are working with 540 class motors.


Introduction:

- Toro TS50 ESC is a brushless sensored ESC with small size, light weight, and electronic power switch, which is designed for 1/10 Buggy and Touring car. It accepts 4-6S NimH or 2S LiPo battery, and its BEC is 6V/2A.
- It comes with well-performed throttle and brake control function. Racers could set punch/brake control rate by point or customize the throttle/brake curve to meet the request for linear and power.
- It also supports firmware update and can be programmed by program box, and SkyLink via PC.




Electronic Power Switch:
A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch.


Less resistance, less heat, more effective


10 User Modifiable Profiles:
The users could set and store 10 sets of profiles in the ESC. These data could be called out at any time without any special program setting. All the setting can be exported or imported so that the user could compare and analyze.


Safety Features:
- Low voltage protection     
- Motor and ESC overheat protection     
- Signal lost protection.

Firmware Update:
The firmware can be updated by connecting the ESC with PC .


Programming Method:
It can be programmed by PC connected with     
1. SKYLINK



2. Program Box


Well-preformed Throttle & Brake Control Function:
Users could set the punch/brake control rate by point or custom the throttle/brake curve by themselves,and different customers' request for linear and power all can be met.


                                                                          Throttle Control Setting


                                                                                       Throttle Curve Custom

                                                                                 Brake Control Setting

                                                                                      Brake Curve Custom

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha