Standard Cable Length Replica TEA U94V2 PTT 6Pin Soft Rubber Waterproof Interface Push to Talk

Standard Cable Length Replica TEA U94V2 PTT 6Pin Soft Rubber Waterproof Interface Push to Talk

Description:
- This PTT is a high-fitting, high-restoration replica TEA style 6-pin U94V2 PTT.
- Restore the original TEA short line Style 6 pin U94V2 PTT in details such as cable length and plug style.
- This product is dedicated to restoring all the features of this original product and providing it to players who need exquisite details.
- The cable length is cut strictly according to the size of the original product, and the size length is the same as that of the original product. Please refer to the original product drawing on the end.

Specification:
- Cable outlet position protrusion: Yes
- Cover method for screw holes: screws
- Reinforcement ribs on both sides below the PTT button: Yes
- Shell Date Stamp: Yes
- Number of holes punched on the outer side of the back clip: three holes
- Back clip engraving: Yes
- Plug style: new soft rubber top waterproof plug

* The height of the PTT button is adjusted to be consistent with the original product, slightly higher than the button circle.


* The replica U94V2 PTT has the same internal structure and appearance details as the original product. The screws are of the original specifications and can be interchangeable with the original product, not a national standard. After removing the screw, there is a hard protective ring around the screw sleeve, which is the same as the original product. The appearance of the screws is also consistent with the original product, and even the position of the glue injection port on the shell is the same as the original product.


* The hardness of the cable is close to that of the original product, with a certain degree of toughness, and it is not a flexible wire without any support.


* The detachable waterproof cover of the headphone plug can be replaced by the long or short covers to adapt to large-sized headphone interfaces.

* Three hole back clip, laser engraving on the back, engraving information and content, font size and thickness consistent with the original product, and engraving content corresponding to the product one by one.


* The front screw hole is blocked with screws. Customized original specification screws have the same appearance as the original product and can be interchanged with the original product. The depth and size of the date stamp are also the same as the original product.


* The new soft rubber roof waterproof interface has a hexagonal part made of nylon material, wrapped with soft rubber, which is consistent with the original material and size.

* The black long middle section is marked with an orange raised 6-pin plug, and the 6-pin base is green. Non silver plug/blue base, please pay attention to this detail.

* Compatible with original PELTOR COMTAC and replica COMTAC headphones, working properly with PRC148 and PRC152.

Package Included:
- 1 x PTT Cable

Note:
- Other products displayed in the picture are not included, for demonstration only.