TF-NTP-PRO 6-Port Network Time Server NTP Server + 30M/98.4FT Antenna for GPS GLONASS Beidou QZSS

TF-NTP-PRO 6-Port Network Time Server NTP Server + 30M/98.4FT Antenna for GPS GLONASS Beidou QZSS

Introduction:
The TF-NTP-PRO is a stratum 1 NTP server with an integrated GNSS receiver. It provides NTP, 1PPS and TOD timing outputs. The NTP server uses GNSS (Global Navigation Satellite Systems) signals from GPS, GLONASS, Beidou, and QZSS as the primary time source for synchronization.

The time server can use its built-in TCXO (temperature compensated crystal oscillator) as autonomous time base for providing several hours of accurate holdover in case that GNSS signals are not available.

The time server has 6 ethernet ports isolated physically, the ports have no communication with each other to ensure network security.

The NTP serer is in a 19-inch 1U chassis with rack mount ears for installation.

Features:
- Internal TCXO: It still allows high-precision timing signals to be provided after satellite signal loss
- No subsequent fees
- Supports NTP broadcast and MD5 security authentication
- 6-way physically isolated network ports: The IP address of each network port can be set independently to ensure network security
- 7x24h stable operation
- Good compatibility: Supports all NTP clients on the market, such as for Windows, Linux, Hikvision, Tiandy, Dahua, KEDACOM and Uniview
- It can get the time automatically from your local computer. It can also be used normally in closed and shielded environments without satellite signals
- NTP timing logs are supported
- Antenna status can be detected
- The IP addresses of all network ports can be centrally managed
- 6000 transaction/second for every port
- NTP accuracy 0.5-2ms
- Web UI monitoring and management
- Multi-GNSS receiver (GPS, GLONASS, Beidou and QZSS)
- NTP v2 (RFC 1119), NTP v3 (RFC 1305), and NTP v4 (RFC5905)
- SNTP v3 (RFC 1769) and SNTP v4 (RFC 2030)
- 1PPS output
- 1 RS-232 serial port with ToD output (NMEA ZDA or RMC)
- GPSd is supported via ethernet port 1 (TCP protocol, port 4001)
- RTC
- With OLED display
- Power consumption < 10W

Package Included:
- 1 x NTP Server
- 1 x 30M/98.4FT Antenna

Specifications: