| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $23.52 | $23.04 | $22.32 | $21.36 | Contact US |
TQP3M9008 5MHz–4GHz Low Noise Amplifier LNA Amplifier Module (with 20DB Gain) Powered by Type-C 5V
Attention:
* Ensure the input (RFin) and output (RFout) ports are connected first, and only then connect the DC power supply.
* When supplying DC power to the module, make sure the positive and negative terminals are connected correctly. Do not reverse the polarity, as this can damage the module!
Description:
This is a 5MHz–4000MHz high flatness amplifier module. Its label text is printed with rosin and does not wear off easily over time. It can be conveniently powered by a 5V Type-C phone charger, a computer USB port, or a 5V USB port on test equipment.
It can be used in general frequency bands such as VHF, UHF, BeiDou, positioning, navigation, and video transmission. And it is also suitable for use as a driver amplifier in front-end applications.
Before powering on, please connect the input signal and output load properly.
Specifications:
* Bandwidth: 5MHz–4000MHz
* Power Supply: 5V / 85mA
* Noise Figure (NF): 1.3dB (typical)
* Maximum Input Power: ≤ 0dBm
* Maximum Output Power: 100mW (20dBm, typical)
* Input/Output VSWR: ≤ 2.5dB
* Gain: 20dB (typical)
* Input/Output Impedance: 50Ω
* Input Voltage VPP: < 0.225V
* Enclosure: CNC precision machined
* Connector Type: SMA female
Instructions for Use:
* RFin is the signal input terminal
* RFout is the signal output terminal
* GND is the DC power negative terminal
* DC is the DC power positive terminal
Packing List:
* 1 x LNA Amplifier
Packaging Details:
* G.W.: 0.22kg
