| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $88.97 | $87.16 | $84.43 | $80.80 | Contact US |
High End Version JTAG SWD Programmer MCU Debugger STM32 Emulator Debug Tool Set for Jlink V11
$49.55
Standard Version JTAG SWD Programmer MCU Debugger STM32 Emulator Debug Tool Set for Jlink V11
$45.75
For Jlink V12 JTAG SWD Programmer MCU Debugger STM32 Emulator + Adapter Board + 7 Kinds of FFC Cables
$57.33
USBCAN-Pro USBCANPro USB to CAN Adapter USB CAN Analyzer w/ Black Shell Enables High Performance CAN
Description:
USBCAN-Pro supports CANMonitor, CANTest and CANPro protocol analyzer software. It also supports secondary development of the upper computer.
A new mode switch button allows you to quickly switch between two modes.
CANMonitor software interface
The self-developed host computer software can send and receive data of dual CAN channel to meet the requirements of conventional debugging.
Bus baud rate measurement
By measuring the CAN bus signal width time, the CAN bus baud rate can be calculated quickly and efficiently.
Relay transport
The relay transmission function can receive and display the CAN data emitted by the automobile engine and instrument through CAN0 and CAN1 ports separately for protocol analysis, and does not destroy the mutual communication between the two.
Save CAN data files
The CAN information in the window can be saved as an EXCEL table file or a CAN data format file, which can be used for online playback and offline sending.
Online CAN data playback
Import the CAN format data file and select the playback mode: according to the time identification or time interval. Choose whether to loop playback according to the requirements, and click Send for online data playback.
Offline cyclical sending
The CAN frames to be sent and the corresponding sending interval can be configured on a computer, or the pre-saved CAN format file can be imported into the window, and after downloading it to USB CAN analyzer, it can be automatically sent offline to simulate the CAN data of some sensors or GPS receivers.
ID filtering settings
Write the ID you want to receive into the edit box, click Calculate to get the acceptance code and shielding code setting values, and then click Confirm to complete the settings.
Parameter configuration software interface in CANBridge mode
Supports common baud rates and custom baud rates
Supports 32 kinds of ID filtering configurations
Supports 64 kinds of frame mapping configurations
Mode switching
It supports multiple working modes. Users can switch modes by switching tool software.
Package Included:
- 1 x USB to CAN adapter
- 1 x USB cable
- 2 x CAN adapter boards
