• USRP-B210 MICRO+ 70MHz- 6GHz SDR RF Development Board USB3.0 with OCXO Support Band Preselector/ USRP Driver
  • USRP-B210 MICRO+ 70MHz- 6GHz SDR RF Development Board USB3.0 with OCXO Support Band Preselector/ USRP Driver
  • USRP-B210 MICRO+ 70MHz- 6GHz SDR RF Development Board USB3.0 with OCXO Support Band Preselector/ USRP Driver

USRP-B210 MICRO+ 70MHz- 6GHz SDR RF Development Board USB3.0 with OCXO Support Band Preselector/ USRP Driver

Availability: In stock, usually dispatched in 1 business day

  • Price:$944.00
  • Price in reward points: 9440 Reward Points: 94
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $925.12 $906.24 $877.92 $840.16 Contact US
Quantity:

USRP-B210 MICRO+ 70MHz- 6GHz SDR RF Development Board USB3.0 with OCXO Support Band Preselector/ USRP Driver


 Description:
- Fully compatible with USRP B210 high performance SDR
- Support Dual channel transceiver function
- Support  Band Preselector

- The new version of the B210, using special high frequency RF substrate, and the performance and stability of the re inductor are greatly improved, the RF performance, compared to the old version of B210, in the acceptance test of CW modulation signal, 6DB SNR, 2G frequency within the receiving sensitivity to compare the old version improves 1.5-2DB. The threshold of the receiving sensitivity of the 4G frequency is increased by 2DB. Increase the reception threshold above 4G to improve 1.5DB
- The CW modulation signal is emitted, within 3G, the maximum transmission power is greater than 10DBM, the typical value of 1GHz is 18dbm, and the typical value of 2GHz is 15dBm. 2-3.5DBM is raised above 4GHz, and the typical maximum value of 4.5GHz is 13dbm. The typical maximum value of 5.5GHz is 11dbm.
 - It can be seen that the enhancement of the RF performance is very large, especially the emission performance above 4G is particularly significant.

Features:

- mini size : 100mm*75mm
- RF development board Micro B210 retains the original design DEBUG interface and GPIO interface, and also brings out the GPIO interface of AD9361 and the debugging interface of USB interface chip, which is convenient for developers to develop and debug
- First fully integrated, two-channel USRP device with continuous RF coverage from 70 MHz - 6 GHz ,
- Full duplex, MIMO (2 Tx & 2 Rx) operation with up to 56 MHz of real-time bandwidth (61.44MS/s quadrature)
- Fast and convenient SuperSpeed USB 3.0 connectivity
- GNURadio and OpenBTS support through the open-source USRP Hardware Driver™ (UHD)
- Open and reconfigurable Spartan 6 XC6SLX150 FPGA (for advanced users)
- Early access prototyping platform for the Analog Devices AD9361 RFIC, a fully integrated direct conversion transceiver with mixed signal baseband
 
Support for the following development software platforms:
GNURADIO, MATLAB, LABVIEW, OPENAIRINTERFACE5G (OAI), OpenBTS, OpenLTE, srsLTE, Amarisoft and other software platforms.

Package: 
- 1 x SDR board
- 1x USB cable 


Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha