| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $33.01 | $32.33 | $31.32 | $29.98 | Contact US |
WFSGS-06 Handheld Signal Generator Module 4-20mA 2-10V Signal Source PWM Pulse Sine Wave
Description:
Handheld multifunctional signal generator enables PWM, pulse, signal source, sine wave, and triangle wave.
Product Parameters:
- Charging and Power Supply Voltage: USB 5V (when built-in battery is fully charged, it can work continuously for 8 hours, the battery capacity is 1000mAh)
- Product Functions: PWM mode, pulse mode, signal source mode, sine wave mode
- PWM Mode: voltage, frequency, and duty cycle are all adjustable, with frequency accuracy up to 0.1%; voltage range: 1-24V, frequency range: 1-150KHZ, duty cycle range: 0-100%
- Pulse Mode: initial delay time T0: 0-60S, high level time T1: 0-60S, low level time T2: 0-60S, number of pulses P-N:1-99999999, resolution: 0.001S
- Signal source mode: voltage source 2-10V adjustable, current source 4-20mA adjustable
- Sine wave mode: 1-999999HZ adjustable (Triangle wave adjustable range is the same)
- Signal load capacity: the maximum output current is 20mA (Note: this product is a signal source, which cannot directly drive high-power loads)
- Environment temperature: -10 to 70℃
- Dimensions: 92 x 70 x 28mm
- Weight: 105g
Package Included:
- 1 x Set of Signal Generator 
Reset:
Turn off power supply, press and hold SET button while turning on power supply, and then release SET button after two seconds.
PWM Mode:
Press F1 once to enter the mode. Press the SET key to switch and set voltage, frequency, and duty cycle data in turn (Duty cycle can also be adjusted directly without entering SET mode). Press 
to switch between coarse and fine adjustment. Press 
and 
to adjust data (long press for quick adjustment). Signal is output in real time during the adjustment process. After adjusting the data, press SET key to exit, and press 
to start or stop.
Pulse Mode (PULSE):
Press F1 twice to enter this mode. Press SET key to switch and set voltage, time T0/T1/T2, and the number of pulses in turn. Press to switch coarse and fine adjustment, press and to adjust data (long press for fast adjustment). Signal is output in real time during the adjustment process. After adjusting the data, press SET key to exit, and press to start or pause.
Sine Wave Triangle Wave Mode:
Press F2 once to enter sine wave mode. Press F2 twice to enter triangle wave mode, and then start to output signal (the peak is 5V, the voltage is not adjustable).Press SET key to adjust the frequency, press to switch coarse and fine adjustment, and press and to adjust data (long press for fast adjustment). Signal is output in real time during the adjustment process. After adjusting the data, press SET key to exit.
Voltage Current Signal Source Mode:
Press F3 once to enter this mode. Press SET key to switch and set voltage and current in turn, and start to output signal when it is entered. Press to switch between coarse and fine adjustment, press and to adjust the data (long press for quick adjustment). Signal is output in real time during the adjustment process. After adjusting the data, press SET to exit.
