Y650-V2 Tri-copter 3-Axial/Y6 Copter DIY Frame Folding Design

Y650-V2 Tri-copter 3-Axial/Y6 Copter DIY Frame Folding Design

Description:
- 1.5mm thick Fiberglass Central plate.
- Folding design, easier for carriage and storage. Assemble and disassemble without tools.
- Front-positioned camera tile mounting design (camera tile sold separately), so as the prop and landing skid can be out of camera view.

Specifications:
- Motor spacing(distance between motor axles, cross side): 650mm
- Weight: 545g
- Mode: 3-axial, Y6
- Central plate material: 1.5mm thick Fiberglass
- Arm material: Aluminum with inner reinforcement rib
- Landing skid type: high landing skid, easy-disassemble design
- Height of landing skid: 190mm
- Camera mount/tilt mounting tube diameter: 12mm
- Motor mounting seat spacing: 16cm/ 19cm

Suggested setting (not included):
- brushless motor: HL 3525 series or HiModel 2212-2217 series
- KV range: 3S Lipo 800-1100KV; 4S Lipo 600-700KV
- Suitable camera mount/tile: T12 (suite for Gopro HD19 camera etc)

* Not assembled, camera mount/tilt sold separately.

Package included:
- 3 x Arm
- 6 x Motor Mounting plate
- 2 x Center Board
- 1 x Landing skid Set
- 4 x Landing skid rubber dampers
- 4 x PTZ Adapters
- 1 x Screw and nuts set