1-500MHz RF SWR Reflection Bridge RF Directional Bridge For Network Measurement AYT-3

1-500MHz RF SWR Reflection Bridge RF Directional Bridge For Network Measurement AYT-3

Description:
The electric bridge is a sensor for measuring the reflection coefficient, which is used for RF network measurement. Output reflected signal has amplitude and phase information, and features wide frequency and high directivity. Simple application of this bridge can be combined with a radio frequency spectrum analyzer or a frequency sweeper with a tracking source, which can measure the return loss of the device and the reflection of the entire frequency band. For example, a vector voltmeter or a vector voltage measurement device plus a signal source can be accurately measured circuit vector impedance, complete the test and debugging of RF matching circuit. Widely used in antenna measurement and debugging, radio frequency circuit and radio, television and communication equipment measurement and debugging.

This is a compact and practical bridge for radio frequency bands. The directivity is ≥36dB in the whole band, and ≥40dB in the low-band frequency.

The third figure is to measure the performance of a 432MHz small antenna with a 5011 spectrum analyzer at a level of 20MHz/div.

Specifications:
- Model: AYT-3
- Frequency range: 1MHz～500MHz
- Characteristic impedance: 50Ω
- Directionality: ≥36dB
- Maximum input power: ≤0.2W
- Insertion loss: 6.5dB±0.5dB (from input end to measurement end)
- Connector type: input terminal, output terminal and measuring terminal are all N Female
- Product Size: 85 x 45 x 26 mm (LxWxH)

Package Included:
- 1 x Set of Reflection Bridge