AOMWAY Sony 700TVL 10X Zoom FPV CCD Camera Remote Control Wireless Zoom Camera For FJI Phantom Photography

AOMWAY Sony 700TVL 10X Zoom FPV CCD Camera Remote Control Wireless Zoom Camera For FJI Phantom Photography

Description:
- Special Designed for DJI Phantom,with glass fiber anti-vibration plate, can effectively filter part of the spectrum of vibration, improve the quality of images of high magnification
- This camera adopts original SONY EFFICO 700 1/3 CCD chip
- High speed remote control optical zoom
- D1 quality color ensures gorgeous effect ,much better than ordinary rc camera
- Support DSP Technology

Features:
- Wireless Zoom function,high-speed automatic zoom suitable for any kind of spectrum of remote control (27m /72m /433 m 2.4G）
- Resolution :700Tvl, minimum illumination can reach 0.05 LUX, with off memory function
- With OSD function(OSD cable not included)
- Day & Night | ICR | Day And Night Conversion function(Day:Color image/Night:Black & White,to acheive best image effect)
- 2d noise reduction, automatic gain, can adjust itself according to the environment
- With a wireless intelligent remote control, can reach 300m distance to change times barrier-free/control, Support 3.9 -85.8 mm Canon camera
- Wireless remote control zoom (can choose different models in the biggest 10 x 30 x zoom) throughout the zoom only 3 s completed
- automatically conversion betweenHands on and automatic zoom
- Support 9-17V(support 3-4S)
- with OSD menu function,English/Chinese optional
- 2400/4800/9600 Baudrate optional (pls tell us if you have special requirement)
- Built in IR-Cut chip

Specifications:
- Chip:1/3＂SONY CCD
- Sensor range:3.6mm(H)×2.7mm(V)
- Resolution:PAL:500(H)×582(V) NTSC:510(H)×492(V)
- Format:PAL/NTSC
- Resolution:700TVL
- Min:0.1Lux/F1.2
- SNR:More than 60dB
- auto shutter:PAL:1/50s-1/100,000s NTSC:1/60s-1/100,000s
- Support lens:3.9~85.8mm
- Gamma correction:0.45
- GAin:ON/OFF Switchable
- White balance:ON/OFF Switchable
- Backlight compensaction:ON/OFF Switchable
- Video Output:1.0Vp-p,75Ω,BNC Connector
- Power:DC 12V（9-16v）
- current:150mA(200mA Control)
- Weight:165g
- Size:83mm×40mm×43mm
- Material:Fiberglass

How to connect:
- telemetry connection:Dual 3p servo port or 5pin dupont cable port to connect telemetry or OSD,Default Format is PAL(White-AV Signal cable, Red-Power cable ,Black-Ground)
- Zoom control cable standard 3p servo cable port (White-AV Signal cable, Red-Power cable ,Black-Ground),Pick up any channel receiver, a proportional knob should be allocated to the channels


How to operate:
- Power on for OSD/Telemetry,The camera will detect the location of the real-time monitoring zoom channel knob,then camera will quick change Zoom and enter into auto-zoom mode.Under this mode,Camer a will detect the best zoom effect .Note:under hand on zoom Mode,camera will keep the focus and zoom will not change