APC300 Wireless TX Module Temperature and Humidity Sensor One-way Transmitter Module

APC300 Wireless TX Module Temperature and Humidity Sensor One-way Transmitter Module

Description:
- APC300 module is a highly integrated, ultra-low-power one-way transmitter module, the module uses the ultra-low-power microcontroller and high-performance, low-power transmitter chip, built-in 12bit high precision ADCs can directly connect a variety of digital and analog mainstream PT1000 sensors, such as thermistors, digital temperature and humidity sensor. Users do not need to write the wireless sensor part of the software, do not need additional MCU and peripheral devices.
- The the APC300 module provides a choice of multiple channels can be modified online serial rate, the various parameters of the transceiver frequency, transmit power, RF rate transmission intervals and sensor type.
- APC300 module can be timed and send sensor data, the module can work in the voltage range of 2.1-3.6V, 10dBm transmitter power consumption is only 14mA, sleep power consumption as low as 1.5uA the reasonable set the acquisition cycle, usually a common lithium batteries (such as ER18505) working life of up to a few years to ten years.


APC300 transmitter module characteristics:
- 700 meters transmission distance (3.125Kbps)
- frequency of 425-450, 863-870, 902-928MHz
- 2.1-3.6V wide voltage operating range
- emission current 14mA @ 10dBm, standby current 1.5uA
- Multi-channel can be set, GFSK modulation
- You can set the timing for the acquisition interval
- can be directly connected to the analog and digital sensor
- number of years to ten years battery life

Package list:
- 1 x APC300 Wireless TX Module