| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $19.30 | $18.90 | $18.31 | $17.52 | Contact US |
M5Stack Paper S3 E-Paper Display Touchable Low Power Consumption 4.7-inch E-ink Display Development Kit ESP32S3
$87.42
LILYGO Grey Shell Version T-Display-S3 1.9-inch LCD Display Development Board WiFi Bluetooth5.0 Wireless Module for Arduino
$32.47
Sketchboard Mechanical Arm Plotter Robot Arm Students Programming Learning DIY Kit for Arduino
$44.05
Arduino Bluetooh Bee Wireless Bluetooth Module Slave Mode
Descriptions:
- Bluetooth Bee is an easy to use Bluetooth SPP module compatible with existing Xbee sockets, designed for transparent wireless serial connection setup.
- Bluetooth Bee is designed for transparent wireless serial connection setup. This is a fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps modulation with complete 2.4GHz radio transceiver. It uses CSR Bluecore4-external single chip Bluetooth system with CMOS technology and with AFH (Adaptive Frequency Hopping).
- It can be configured to Master, Slave or Loopback three different modes(HC-06 just be Slave), and it will connect to or be connected by other devices that support SPP protocol per configuration, and it is a suitable substitute for most
applications.
- We recommend assemble with XBee Shield with logic level converter or Arduino XBee/Bluetooth Bee USB Adapter.
- The AT command reference to "AT command set(HC-06)"
Specifications:
|
Microprocessor |
CSR BC417 |
|
PCB size |
33.7mm * 25.2mm * 1.6mm |
|
Indicators |
PWR State |
|
Power supply |
3.3V DC |
|
Communication Protocol |
UART Bluetooth2.0 |
|
RoSH |
Yes |
Package included:
- 1 x Bluetooth bee module only
