BRZHIFI SAMP-200 600W+600W HiFi Amplifier Board Power Amp Board TPA3255*2 Two Channel Amplifier

BRZHIFI SAMP-200 600W+600W HiFi Amplifier Board Power Amp Board TPA3255*2 Two Channel Amplifier

Description:
TPA3255 is a high-performance Class D power amplifier. It has Class D efficiency and is capable of delivering true high-end sound quality. The device features an advanced integrated feedback design and proprietary high-speed gate driver error correction (PurePath Ultra High Definition). This technology allows the device to maintain ultra-low distortion across the entire audio frequency band while delivering perfect sound quality.

The device operates in AD mode with a maximum output of 600Wx2/2Ω, 300Wx2/4Ω, or 200Wx2/8Ω and features a 2VRMS analog input interface for seamless connection to high-performance DAC such as PCM5242 for TI. In addition to excellent audio performance, the TPA3255 combines high power efficiency with ultra-low power level idle losses (less than 2.5W). This can be achieved with 85mR MOSFET and an optimized gate driver scheme. Compared to traditional discrete implementations, this scheme significantly reduces idle losses.

Features:
- Dual TPA3255 600W+600W: With lower distortion, more power and more HIFI listening
- Using two American TPA3255 original power amplifier modules for TI, the output power separation is much better than that of a single module. TPA3255 power amplifier has high efficiency, very low distortion, no noise floor, and low static power consumption. It's an ideal choice for your home speakers
- The front-end differential input circuit adopts boost technology, and the hearing is stronger than the official single 12V line dynamic
- Fully shielded, dense and low-loss sealed inductor, imported filter capacitor, no pressure on 55V
- Core components are imported

Specifications:
- Output power: 600W+600W/2Ω, 315W+315W/4Ω, 200W+200W/8Ω
- Frequency response: 20HZ-30KHZ
- THD+N: 0.006% at 1W/4; < 0.01% for clipping
- Supply voltage: +19V to +52V
- PCB size: 138 x 128mm/5.4 x 5"

Attention:
- The higher the input power supply, the greater the power supply current and the larger the output. The power test is measured at 50V power supply. If you change it to a 24V 36 low-voltage power supply, the output power will be reduced accordingly.

Package Included:
- 1 x Amplifier board

Packaging Details:
- G.W.: 0.6kg