| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $20.01 | $19.60 | $18.99 | $18.17 | Contact US |
DHPS380 Internal Large Torque Servo Motor High Quality Controller Board for FPV Drone Control
Description:
- Angle adjustment knob A: 0-360 degree angle adjustment, clockwise increase, counterclockwise decrease, default maximum 360 degrees.
- M middle position adjustment knob: Press the middle position adjustment button once to enter the middle position adjustment mode of the servo motor. At this time, adjust the M knob and the servo motor will follow the rotation. After reaching the appropriate position, press the middle position button again to exit the middle position adjustment. This sets the middle position of the servo motor. Once the middle position of the servo motor is set, it is permanently saved and will not be changed unless the setting is changed.
- 1MS mode: The servo defaults to 2MS mode, which means inputting 0.5-2.5MS and turning the servo 360 degrees; When connecting the two pads of 1MS together, it is called 1MS mode. When inputting 1-2MS, the servo can also rotate 360 degrees.
- ZF reverse switching: After the two pads of ZF are connected together, they switch to reverse rotation mode. In other words, while the signal remains unchanged, the original remote control joystick rotates to the left and the servo motor rotates to the right. After switching, the remote control joystick rotates to the left and the servo motor turns to turn to the left.
- Warning: The S terminal is the signal input terminal, with an input voltage of 3.3-5V. If it exceeds 5V, it may burn out the servo motor. The servo motor is powered by 12-24V, with a maximum voltage of 30V. The lower the power supply voltage, the smaller the speed and torque of the servo motor. The servo motor is equipped with reverse power protection.
Special reminder:
- Please conduct self testing for various application scenarios and use them only after passing the test. We are not responsible for accidents in various hazardous application scenarios. (Medical equipment, Life-support system, UAV, manned aircraft and other dangerous application scenarios.)
Package Included:
- 1 x Controller Board
- 1 x Accessory Pack
Note:
- It is a controller board. The servo motor is not included.
