DY23C DC 12V Automotive Brake Fluid Tester Accurate Car Brake Fluid Tester for DOT3 DOT4 DOT5.1

DY23C DC 12V Automotive Brake Fluid Tester Accurate Car Brake Fluid Tester for DOT3 DOT4 DOT5.1

Description:
DUOYI DY23D This is a car brake fluid tester. It tests the water content of the brake fluid to determine if it needs to be changed. Applicable to DOT3/DOT4/DOT5.1, the data will appear on the screen accurately, which is convenient for technicians to know the brake fluid status in detail from the car owner.

This automotive high-end technology brake fluid tester is equipped with a high-precision probe and is easy to operate. It is an essential tool in the automotive maintenance industry.

Features:
- Available for DOT3 / DOT4 / DOT5.1
- 12V Automotive Battery Power Supply
- Built-in High Precision Probe
- Audible and Visual Alarm

Specifications:
- Brake Fluid Type: DOT3 / DOT4 / DOT5.1
- Power Supply: DC 9V-24V
- Operation Temperature: 0℃~50℃ and 32℉~122℉

Safety Rules:
1. This tester is only used for testing automotive brake fluid. We are not responsible for any product damage or property loss caused by using it for other purposes.
2. The use of this equipment requires professional technicians, or trained maintenance personnel, non-car repair personnel or children do not touch and use it.

Packing List:
- 1 x Protective cover
- 1 x Main unit
- 1 x Probe
- 1 x Alligator clip

① LCD Display
② Left Button: brake fluid selection / cursor left move / numeral decrease
③ Right Button: brake fluid selection / cursor right move / numeral increase
④ UP Button: interface return
⑤ Confirm Button: brake fluid confirmation / printing confirmation / numeral confirmation
⑥ Test Probe
⑦ Clamps: red clamp: connect to positive terminal of battery; black clamp: connect to negative terminal of battery

How to Operate?
Step 1: Connect red and black clamps to positive and negative terminals of automotive battery respectively to power on tester.
Step 2: Press Left Button and Right Button to select tested brake fluid , then press Confirm Button to confirm.
Step 3: Immerse test probe into brake fluid and press Confirm Button to test.
Step 4: Test result will be seen in LCD Display. Different result refers to different display as figures below.

Step 5: Press Confirm button to enter printing interface. Date and VIN number (last 4 digits) setting are available. Press Left Button or Right Button for numeral decreasing or increasing. Pressing Confirm Button is required after every digit confirmed and let cursor move to nest position, and so on. After all set, press Confirm Button to print out test result.

Note:
Up button is available to return to previous display interface when below situation encounters.
1. Select wrong type of brake fluid and need to reset it.
2. Retesting is required prior to printing out test report.