150W PTC Heater 3D Printer Chamber Heater Temperature Controller for Bambu Lab P1S/X1C 3D Printer

Features:
- Automatic start/stop with heated bed.
- 150W PTC heater.
- 10 to 70℃ constant temperature range.

Using Instruction:
- After installation, turn on the power switch of the heater. The display screen shows ---, indicating standby mode. Press the left or right button to change the set temperature. Each time you press it, increase or decrease by 1 degree. The display screen will flash to show the set temperature value. After 3 seconds, it will automatically save and exit the setting state. The set temperature value can be saved after power off.
- After setting the temperature, normal printing is sufficient. When the heated bed starts heating, the heater automatically starts heating, and the display screen shows the real-time temperature of the current chamber. When the set temperature is reached, it automatically maintains near the set value. After printing is completed, the heater will automatically turn off after a delay of 1 minute and display ---.

Package Included:
- 1 x Heater
- 6 x Doubling Clips
- 1 x Power Cable