PZ-ZU49DR-KFB Zynq UltraScale+ RFSoC FPGA Development Board XCZU49DR 16-Channel ADC DAC 100G

* ZYNQ UltraScale+ Development Board

* Architecture for ARM + FPGA

* 16-Channel DAC (9.85GSPS)

* 16-Channel ADC (2.5GSPS)

* 100G Optical Port

* Supports PYNQ with Rich Examples

* Processor Architecture: For ARM + FPGA, FPGA

* Expansion Interfaces: MicroSD, 40-Pin GPIO, USB, GPIO

* Operating System: Linux

* Typical Applications: Embedded Hardware, IoT, Energy & Environmental Applications, Automotive Electronics, Consumer Electronics

* Network Interfaces: USB 3.0, RS485, UART, I/O, Gigabit Ethernet (1 Gbps)

* Compatible Expansion Module: 1 Module

* Development Board: PZ-ZU49DR-KFB

* Controller: XCZU49DR-2FFVF1760I

* Cores: For ARM: 4 x Cortex-A53 1.333GHz; RPU: 2 x Cortex-R5 533MHz

* Speed Grade: Grade 2

* Temperature Grade: Industrial grade (-40°C to 85°C)

* Logic Cells: 930k

* LUTs: 425k

* DSP Slices: 4272

* Block RAM: 38Mb

* DDR4: PS side 8GB 2400MHz 64bit and PL side 8GB 2400MHz 64bit

* QSPI Flash: 2 channels (QSPI0 + QSPI1), 512Mb per chip, 1Gb total

* eMMC: 32GB, stores boot files and user files* Boot Method: JTAG/QSPI/SD/eMMC, selected by onboard DIP switch

* ADC Channels: 16 channels with 2.5Gsps sampling rate

* DAC Channels: 16 channels with 9.85Gsps sampling rate

* PS Side GTR Interface: 4 Pairs TX/RX

* PL Side GTY Interface: 16 Pairs TX/RX

* Expansion IO Quantity: MIO: 38 (Fixed 1.8V level); HP: 144 (1.2/1.8V adjustable, default 1.8V); HD: 96 (1.8/2.5/3.3V adjustable, default 3.3V)

* Crystal Oscillator: 1 single-ended 33.3333MHz crystal oscillator supplied to PS, 1 differential 200MHz crystal oscillator supplied to PL, 1 differential 125MHz crystal oscillator supplied to GT interface, and1 dedicated clock chip providing clock to ADC/DAC

* Core Board Size: 100mm x 100mm

* Integrated JTAG Downloader: 1 Channel

* UART/RS485/CAN: 1 Channel/1 Channel/1 Channel

* SD Card Interface: 1 Channel

* PS Side SSD Interface: 1 Channel

* Gigabit Ethernet: PS Side 1 Channel

* Mini DP Output: 1 Channel

* USB 3.0 Host/Slave Port: 1 Channel

* SSD Storage: 1 Channel

* QSFP28 Interface: 2 Channels/100G

* GPS Module: 1 Unit

* FMC Interface: HPC Interface, fully connected signals

* Power Supply: 12V 3A

* Development Board Size: 275mm x 220mm

* Development Board Craftsmanship: Matte black, immersion gold

* 40P Expansion Port: Total 32 signals (Includes 1-channel 5V power, 1-channel 3.3V power, 6 GND, 32 IO ports)

* 1 x Development Board

* 1 x 12V/5A Power Adapter

* 1 x Type-C Cable

* 1 x Heatsink (with fan)

* 32 x RF Cables

* 1 x GPS Antenna

* 1 x 32G SD Card

* 1 x SD Card Reader

* Package weight: 3.6kg

Click to Learn More: Core Board