100W One-Way Desktop Fast Charging Module + Shell + 5521 Cable w/ Male Connector for PD 100W and PPS

100W One-Way Desktop Fast Charging Module + Shell + 5521 Cable w/ Male Connector for PD 100W and PPS

Description:
The 100W fast charging module can be welded to a voltage current meter.

Attention:
We've tested as many cellphones of major brands as possible, but we can't guarantee that your phone is supported by the fast charging module.

Features:
- Supports full-grade PPS 3.3-21V, PPS maximum 3A, 63W
- PD maximum 20V 5A 100W
- A 100W data cable is required for PD protocol greater than 60W
- Supports PPS/PD3.0/PD2.0
- Supports QC4+/QC4/QC3.3/QC2.0
- Supports PE2.0 and PE1.1
- Supports AFC/FCP/SFCP
- Supports VOOC (1st generation) up to 22.5W
- Multiple protection mechanisms: input over-voltage protection, input under-voltage protection, output over-current protection and output short-circuit protection
- On-board integrated chip NTC thermistor
- With a fuse to ensure safe operation
- The use of 1275 alloy shielded inductors effectively reduces interference
- The front end uses Taiwan's SK series capacitors
- Solid-state capacitors for NPX are used on the back end to reduce ripple
- 5A high-current C port is used to reduce the heat generation by 100W
- 6mr MOSFETs of ultra-low internal resistance effectively reduce heat generation

Technical Parameters:
- Input voltage: DC 6-30V
- Recommended input power supply parameters: DC 24V 5A
- Buck-boost type: Buck (input is 1.2V larger than output)
- Input female socket: 5.5*2.11 (5521)
- Single-layer size (LxWxH): 62.2mm x 22.2mm x 15.3mm/2.4" x 0.9" x 0.6"

Package Included:
- 1 x Fast charging module
- 1 x Shell
- 1 x 5521 cable with male connector

Packaging Details:
- G.W.: 0.2kg

Note:
- You have to assemble the module before use.
- Several big brands of mobile phones in China basically use private protocols, which are basically around 30W. Full power can only support original chargers.