2.4GHz–2.483GHz 50dB LNA Amplifier Low Noise Amplifier (Powered by 5V Type-C) for Video Transmission

* Ensure the input (RFin) and output (RFout) ports are connected first, and only then connect the DC power supply.

* When supplying DC power to the module, make sure the positive and negative terminals are connected correctly. Do not reverse the polarity, as this can damage the module!

The 2.4GHz low noise amplifier is designed for small signal amplification in applications such as video transmission, Bluetooth, and remote control range extension. It features two-stage amplification and two-stage filtering, offering ≥70dB suppression of signals outside the 2.4GHz–2.483GHz range. The noise figure at 2.45GHz is extremely low, ≤0.85dB.

* Power Supply: 5V

* Operating Current: 200mA

* Bandwidth: 2400–2483MHz

* Gain: 50dB

* Noise Figure: <0.85dB

* Input/Output Impedance: 50Ω

* In-band Flatness: <1dB

* Maximum Input Power: -30dBm

* P1dB Output Power: 20dBm (100mW)

* Housing Dimensions: 58 × 31 × 14 mm (excluding connectors)

* Mounting Holes: M2.5 threaded holes on the base 

* 1 x LNA Amplifier

* G.W.: 0.22kg