LH230-DK 16.7" 120-LED Spectrum Display Rhythm Light without Shell Supports Sound & Wired Control

LH230-DK 16.7" 120-LED Spectrum Display Rhythm Light without Shell Supports Sound & Wired Control

Description:
The louder the sound, the more LEDs will light up from the center to the left and right sides. As the sound rises and falls, the LEDs also jump with the music.

Signal Input:
Due to the board with a high-sensitivity mic, it supports sound control. It also supports wired control. Users who need wired input should insert the 3.5mm plug into the headphone hole of your mobile phone or computer. Please not connect it to the output of your amplifiers or speakers, because the signal is too strong. Technical support for DIY is not offered.

Features:
* Colorful LED lights and high dynamics and sensitivity, without delay
* Stereo music rhythm light with two channels
* 120 LEDs: two rows of LEDs. Each row with 5 red, 10 blue, 10 pink, 10 green, 10 pink, 10 blue and 5 red LEDs
* 5 display modes: 1. dual bar with peak lights; 2. multi-point mode; 3. one bar with peak light and one bar without peak light; 4. dual bar without peak light; 5. one bar with peak light + multi-point mode
* Support sound and wired control: plug in a 3.5mm audio cable for wired control and plug out the cable for voice control

Specifications:
* PCB size: 42.5 x 4cm/16.7 x 1.6"(LxW) (without shell)
* LED: 5mm round head fog LED with even light
* Numbers of LEDs: two rows, 120pcs in total (from left to right, there are 5 red, 10 blue, 10 pink, 10 green, 10 pink, 10 blue and 5 red LEDs per row)
* Power supply: DC 5V 2A~3A (powered by mobile phone charger). The board with MicroUSB socket (for Android phone charging cable)

Package Included:
* 1 x Rhythm Light

Note:
* 5V power supply and audio cannot be connected to the output end of amplifiers or speakers.
* Power cable should be prepared by yourself.