Makerbase MKS SERVO57D RS485 PCBA 57 Closed Loop Stepper Motor Driver Board for 3D Printer and Mechanical Arm

Makerbase MKS SERVO57D RS485 PCBA 57 Closed Loop Stepper Motor Driver Board for 3D Printer and Mechanical Arm

User Manual:
- https://github.com/makerbase-motor/MKS-SERVO57D/tree/master/User%20Manual

Schematic:
- https://github.com/makerbase-motor/MKS-SERVO57D/tree/master/Hardware

Features:
- Support 6 working modes: pulse interface (open loop, closed loop, FOC mode), serial interface (open loop, closed loop, FOC mode)
- Support RS485 interface
- Support MODBUS RTU communication protocol
- Support curve acceleration and deceleration
- Support limit switch to return to zero
- Support speed mode, relative position and absolute position control mode
- Support 1~256 arbitrary subdivision, support arbitrary working current setting
- The maximum input pulse frequency is 160KHz, and the maximum speed is 3000RPM
- Support multiple motor synchronous working modes
- Aluminum alloy shell

Package Included:
- 1 x Set of MKS SERVO57D RS485 MB

Note:
- The motor is not included.