Radioberry V2.0 SDR Radio Card AD9866+10CL016 SDR Module with 7-inch Capacitive Touch Screen DIY for Raspberry Pi 4B

Radioberry V2.0 SDR Radio Card AD9866+10CL016 SDR Module with 7-inch Capacitive Touch Screen DIY for Raspberry Pi 4B

Description:
- The radioberry is actual a radio card (raspberry pi hat), which can be plugged into a raspberry pi, forming a Software Defined Radio (SDR).
- The radio card uses an Analog Devices AD9866 which is a 12-bit broadband modem mixed signal front end that has been repurposed as a direct down conversion (DDC) and direct up conversion (DUC) SDR transceiver covering 0-30MHz.
- The radio card adopts for Intel Cyclone 10CL016 FPGA. The firmware will be loaded via the raspberry pi.
- Power supply for the radio card is provided by the raspberry pi.
- This screen is suitable for raspberry pi MIPI DSI interface (motherboard identification: display / 15pin 1.0mm spacing), can not be used for computer host or raspberry pi motherboard without MIPI DSI interface (such as zero), and can not be suitable for other chip motherboards.
- Raspberry pi MIPI DSI interface outputs directly, plug and play, without installing driver.
- Without separate power supply, touch + Display + power supply are all solved by one flexible cable.
- Support raspbian multi touch; Support Ubuntu / Kali / win10 lot single touch; Retropi support.
- 800x480 resolution display, 7-inch TN optional.
- Support PWM backlight brightness adjustment to adapt to different use environments (backlight adjustment buttons have been added in the whole series).
- Please connect or disconnect the cable after the raspberry pi is powered off, otherwise the display and raspberry pi may be damaged!

Reference Video:
- https://www.youtube.com/watch?v=kt7jA0T12E8

Note:
- Raspberry pi 4B is not included.

Package Included:
- 1 x Radio Card
- 1 x 7-inch Touch Screen