S06 High Precision Lightweight Fiber Optic Cleaver 12 Cutting Points Support Automatic Blade Reset

Precaution:
- Make sure to place the fiber optic cable correctly in the fixture slot.
- Within a certain number of times of cutting the same end face of the blade, the end face should be switched in a timely manner to ensure the quality of fiber end face cutting.

Features:
- The blade has 12 cutting points, with 3000 times per point, and a total service life of over 36000 times.
- The average cutting angle is less than 0.5 degrees.

Specifications:
- Fixture: 3-IN-1 universal fixture
- Applicable fiber: single core silica optical fiber (250um, 900um)
- Applicable fiber type: pigtail, rubber-insulated wire, bare fiber (optical cable)
- optical bare fiber diameter: 80 - 150um
- Cleaved length: 5 - 25mm
- Reset function: blade automatic reset
- Cutting angle: ≤0.5°
- Blade life: 36000 times
- Product size: 54 x 58 x 58mm
- Net weight: 310g

Package Included:
- 1 x Fiber Cleaver

Using Methods:
1. Please lift the large pressure plate of the cutting blade, open the small pressure plate of the single core fiber optic fixture, and confirm the position of the blade slider on the front side.
2. Place the fiber in the groove of the single core fiber optic fixture, align the coating boundary line with the measurement scale of the appropriate cutting length of the fiber optic cable. (For example, when cutting a length of 16mm, align the coating boundary line with the 16mm mark.) At this point, please confirm whether the bare fiber part is straight.
3. Cover the small pressure plate of the fiber optic cable fixture and clamp the fiber optic cable.
4. Lower the large pressure plate of the cleaver, advance the blade slider, and cut off the fiber.
5. Lift the large pressure plate of the cleaver, and the blade will automatically reset. Open the small pressure plate of the fixture, take out the optical fiber, and remove the fiber debris.