| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $98.00 | $96.00 | $93.00 | $89.00 | Contact US |
Opensource 3-Axis 3D Brushless FPV Camera Gimbal Frame Debugging-free for SARGO SJ4000/7000 Camera
$66.23
Light-weight Aluminum Alloy FPV Drone Gimbal Bracket 22-28mm Hole Spacing Camera Stand for FPV Head Tracker with 2PCS Servos
$19.84
Light-weight Aluminum Alloy FPV Drone Gimbal Bracket 22-28mm Hole Spacing Camera Stand for FPV Head Tracker
$16.42
Feiyu Tech FY MiNi2D 2-Axis Brushless Gimbal For Gopro4 Gopro3+ Gopro3 Sport Camera
Description:
| Minimum | Standard | Maximum | Remark | |
| Working Voltage | 7.0V | 8.4V | 14.0V | |
| Static attitude tracking accuracy | 0.01 | 0.02 | 0.05 | Gimbal static mode |
| Motion attitude tracking accuracy | 0.1 | 0.2 | 0.5 | Motor overload less than 2G |
| Motor overload protection current | 800mah | |||
| Pitch angle | -150°(down) | 0°(horizontal) | +150°(up) | |
| Roll angle | -45° | 0°(horizontal) | +45° | |
| Heading angle | -120° | +135° | ||
| Pitch following rate | 2°/sec | 25°/sec | ||
| Heading following rate | 3°/sec | 75°/sec | ||
| Weight : 110g (Not included camera) | ||||
Features:
Lighter weight,higher convenience,better performance quality
Easy installation,simply connect to the power supply that can work independently
Suit for Gopro4 Gopro3+ Gopro3 Sport Camera
Gimbal initialization method:
The gimbal is placed,remain stationary,then turn on the power,wait gimal operation,after operating,you can pick up the gimbal to work.
The gimbal needs to be initialized when the following situations occur:
-After starting,there is a small angle deviation between pitch angle and the horizontal.
-There is a small angle deviation between roll angle and the horizontal.
-Keeping heading stationary,heading angle has frequent small angle correction.
Products Caution:
1.Please after installing the Goprp camera ,open the power.
2.Be sure to use the USB conversion head when you connect it to the computer for upgrading firmware,
3.First time using,turn on the power of gimbal,remain gimbal stationary,wait that gimbal initialization is completed,automatically back the gimbal to the horizontal position,it can be used normally,you needn't setting and adjusting parameters.
Package Included:
1x MiNi 2-axis gimbal
