| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $44.31 | $43.40 | $42.05 | $40.24 | Contact US |
Mirror Mode Version Stroke Rehabilitation Gloves Finger Rehabilitation Gloves (Right Hand XXL Size)
$59.97
Mirror Mode Version Stroke Rehabilitation Gloves Finger Rehabilitation Gloves (Right Hand XL Size)
$59.97
Mirror Mode Version Stroke Rehabilitation Gloves Finger Rehabilitation Gloves (Right Hand L Size)
$59.97
HCHO_DART_C Formaldehyde Detector HCHO Detector HCHO Tester Household Indoor Car Air Quality Monitor
1. Introduction:
1.1. Detection gas: formaldehyde (HCHO)
1.2. Power supply: Micro USB 5V/500mA
1.3. Formaldehyde sensor for DART from Britain
1.4. Update data every 2 seconds
1.5. No calibration required
1.6. Detection range: 0~1.5mg/m³
1.7. Accuracy: ±0.02mg/m³
2. Display Indication:
2.1. Two display interfaces, automatic switching:
2.2. Effect indication:
0~0.05mg/m³, Good
0.06~0.08mg/m³, OK
0.09~0.2mg/m³, Bad
>0.2mg/m³, So Bad
3. Precautions:
3.1. Due to the low working current of the detector, some power banks will automatically power off. Please replace the power bank that supports low current mode.
3.2. The detector needs to be warmed up when it is turned on, and it needs to wait for 10 minutes.
3.3. Pay attention to closing doors and windows as much as possible during measurement, and personnel should not approach exhalation or bring air currents. Large turbulence will cause large measurement fluctuations. The best measurement is for half an hour. After the measurement is completed, place the detector in a place where the concentration of formaldehyde is low.
3.4. The tester is very sensitive, please do not convection in strong air, for example, use the tester in front of a fan. The detector is easily disturbed by other gases, such as alcohol, perfume, other alcohols and moldy substances.
3.5. Please not use it beyond specifications!
Package Included:
- 1 x Set of HCHO Detector
