| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $14.86 | $14.55 | $14.10 | $13.49 | Contact US |
Assembled MMDVM T124B Duplex MMDVM Hotspot with 3.5-inch Color Screen for Digital Walkie Talkie Modem
$162.88
Assembled MMDVM T12W Duplex MMDVM Hotspot with 3.5-inch Color Screen for Digital Walkie Talkie Modem
$120.32
Assembled MMDVM T11W Simplex MMDVM Hotspot with 3.5-inch Color Screen for Digital Walkie Talkie Modem
$100.89
Industrial USB to RS485 Converter USB to 485 Converter Module with FT232RL Chip
Description:
This is an industrial USB to RS485 converter with original FT232RL inside. Built-in gas discharge tube, self-recovery fuse, ESD and TVS protection circuit. It is small and exquisite. Simple operation with automatic transmitting, receiving and conversion. It features fast communications speed, stability, safety and reliability. It is perfect for a variety of industrial control equipment or applications with high communications requirements.
Features:
- USB to RS485 communications
- Original FT232RL for high-speed communications, with stability and reliability, better compatibility
- On-board TVS (Transient Voltage Suppressor) effectively suppresses surge voltage and transient spike voltage in the circuit, lightning-proof & anti-static
- On-board self-recovery fuse and protection diodes ensure stable output of current and voltage, provides over-current/over-voltage protections, improve shock resistance ability
- 3 LED indicators for checking power supply and signal transceiving status
Specifications:
- Product type: Industrial USB to RS485 Converter
- Communication Rate: 300-921600bps
- Host port: USB
- Device port: RS485
- USB interface:
Operating voltage: 5V
Connector Type: USB-A
Protection: 200mA self-recovery fuse, ESD protection
Transmission distance: about 5m
- RS485 interface:
Connector type: wiring terminal
Pins: A+, B-, GND
Direction control: software automatically identifies and controls the direction of data transmission
Protection: 600W lightning-proof and surge-suppress, 15KV ESD protection (on-board 120R balance resistance)
Transmission distance: about 1200m (low rate)
Transmission mode: point to multi-points (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more)
- LED indicators:
PWR: Power supply indicator. Red light is lit when there is USB connection and voltage is detected
TXD: Transmitting indicator. Red light is lit when the USB port sends data
RXD: Receiving Indicator. Red light is lit when the device port sends data back
- Operating environment:
Temperature: -15℃ to 70℃
Humidity: 5%RH to 95%RH
- Operating system: For Mac, Linux, Android, WinCE, Windows 10 / 8.1 / 8 / 7 / XP
Development Resources:
Wiki : www.waveshare.com/wiki/USB_TO_RS485
Package Included:
- 1 x USB TO RS485
- 1 x USB Cable Type A Male to Type A Female
- 1 x Screwdriver
