| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $177.76 | $174.13 | $168.69 | $161.44 | Contact US |
BEICHEN BCNet-NAT Basic Version Network Coupler Ethernet Coupler Supports IP Address Exchange
$116.44
BEICHEN ETH-NAT Standard Version Network Coupler Ethernet Coupler Supports IP Address Translation
$159.19
Inno IFS-15A Pro+ ARC Fusion Splicer Fusion Splicing Machine Supports Cladding Alignment 7S Splicing
$2,038.22
Iteaduino SCSI2SD Board SCSI to SD Adapter Emulated SCSI-2 Hard Drive Slot Micro SD Memory Card Slot
Description:
This is an improved version of the popular SCSI2SD. Its smaller, uses less power, and can be powered by the SCSI bus in some cases.
SCSI2SD emulates a SCSI-2 hard drive using a micro-SD memory card. Each SCSI2SD purchase includes a fully assembled and tested circuit board, ready for use.
A SCSI2SD purchase does NOT include the following:
Micro-SD memory card
Bracket for mounting within a 3.5" drive bay
SCSI cables, power cables, usb cables, or any other accessory
SCSI2SD is an and open source project. Please visit the SCSI2SD page at http://www.codesrc.com/mediawiki/index.php?title=SCSI2SD, where you will find the GPL3+ software source code
Note:
- The hardware design for this new board is not currently open source.
- Due to some malicious clones of our board, the models of some components on the board will be worn out at the factory. If you mind, please do not place an order. Thank you!
Features:
1. In-built active terminator
2. Emulates up to 4 SCSI devices
3. Supports sector sizes from 64 bytes to 8192 bytes
4. Firmware updatable over USB
5. Highly configurable over USB. Selectable SCSI ID. Selectable parity support. Enable/disable Unit Attention Condition. Artificial limits on the SCSI disk size (e.g. limit size to 4G to avoid OS bugs). Sector size (can also be set via the SCSI MODE SELECT command, as sent by SCSI format utilities).
6. External LED connector
Technical Specifications:
- SCSI Interface: SCSI-2 Narrow 8-bit 50-pin connector. Supports asynchronous transfers only
- SD Card Interface: Standard SDSC (1GB maximum size), SDHC, SDXC
- Power: 5V via standard molex drive connector, USB, or SCSI BUS powered (requires the SCSI host to supply terminator power)
- Dimensions: 10 x 5 x 2cm/3.9 x 2 x 0.8"
Compatibility:
Please consult the full compatibility list at http://www.codesrc.com/mediawiki/index.php?title=SCSI2SD
Package Included:
- 1 x Board
