GC-2000 Display/Gyro Compass Converter NMEA0183 Digital High Precision Gyro Converter for Radar/Autopilot/ECDIS/AIS Devices

Description:
GC-2000 Gyro converter Digital can convert traditional gyro compass synchronous or step analog signal into digital signal, and real-time display heading data, Meanwhile providing multi-channel standard supply radar, autopilot, ECDIS and AIS devices.

Features:
- 4 digit LED digital display to show heading data in accuracy of 0.1 degrees, brightness adjustable LED.
- Can be applied to a variety of synchronous or stepper compass, to adapt to a variety of transmitting ratio: 360X, 180X, 90X, 45X, 36X.
- Power supply: external power can be savable, it will be able to work properly as long as the setting switch match the compass. When connect to the AC synchronous compass, power supplied by the excitation voltage of the compass. When connect to the stepping compass, power supplied from the stepper signal.

Specifications:
- Power consumption: less than 5W
- Working Temperature: 0℃ ~ +70℃
- Storage temperature: -40℃ ~ +85℃
- Weight: 600g
- Output accuracy: 0.2 degree with 360X synchronous or stepper compass
- Detectable heading angular velocity range: Not less than 10 degree/sec with the 360X synchronization and stepping compass
- Dimension: 170mm x 150mm x 45mm

Input Signal:
Synchronization Compass:
- Excitation voltage: AC 50V - AC 120V, 50/60/400Hz
- Phase voltage: AC20 - AC 110V
- Transmitting ratio: 360X, 180X , 90X , 45X , 36X

Stepping Compass:
- Common polarity: positive type/ negative type
- Phase voltage: DC 24V- 100V
- Transmitting ratio: 360X, 180X, 90X, 45X, 36X

Output Signal:
- GC-2000 Gyro converter Digital output HDT sentence which defined by IEC61162-1 Standard data transfer protocol .
  Sentence format : $**HDT, XXX.XX,T*hh
                (4800, 8 , N , 1 )
  Output baud rate : 4800
  Data bits: 8
  No calibration: N
  Stop bit: 1
  The HDT statement sending frequency: 4 per second

Package Included:
- 1 x Gyro Converter