GCAN-208-2C-F Single-Mode Dual-Core Fiber Optic to CAN Bus Module 9-36VDC CAN Fiber Optic Repeater Adapter (ST Port)

Introduction:
- The CAN bus supports CAN2.0A and CAN2.0B frame formats and complies with the ISO/DIS11898 specification; The baud rate can be set arbitrarily between 5Kbps and 1Mbps.
- The CAN baud rate range supports 5Kbps~1Mbps, and the baud rate of each channel can be configured arbitrarily. There are two configuration methods available: automatic recognition and dip switch. We provide configuration services, please leave a message for the baud rate you want after payment, then you can install and use it directly after receiving the product.
- Compared to simple optical signal amplifiers, CAN fiber optic repeaters can not only achieve signal amplification, but also enhance the quality of fiber optic signals, making them a more suitable choice for long-distance communication environments.
- Single mode long-distance transmission supports up to 20km, effectively eliminating long-distance communication interference and preventing damage to the bus and equipment caused by electromagnetic interference, ground loop interference, lightning strikes, etc.

Specification:
- Fiber Optic channel number: 2
- CAN channel number: 1
- Power supply: 9 - 36V DC
- Working current: 50mA MAX (24V DC)
- Power supply interface: OPEN3 wiring terminal
- Baud rate configuration: hardware automatic recognition or built-in toggle switch
- Fiber optic interface: ST/SC/FC (optional)
- Fiber optic number: single-core/dual-core (optional)
- Fiber optic type: single-mode/multi-mode (optional)
- Fiber optic working wavelength: 1310nm/1510nm
- Transmission distance: single mode 20km
- CAN standard: support CAN2.0A and CAN2.0B frame format, comply with ISO/DIS 11898 specification
- CAN baud rate: 5Kbps - 1Mbps
- Frame flow (Max): throughput per channel Max.: 8000fps/s (CAN baud rate 1M, standard frame test)
- Forward delay: about 30us
- Network delay: about 200us (CAN baud rate od 1M, standard frame, data length of 8 bytes test)
- Terminal resistor: integrated, external dip switch to access
- Isolation level: power supply isolation of 1500V DC; CAN bus isolation of 3000V DC
- EMC testing: ESD contact discharge±4KV, air discharge±8KV; surge±1KV; pulse group±2KV
- Safety specification: CE-EMC, IEC/EN 61000-4-2/4/5
- Working temperature: -40℃ to 85℃
- Installation method: wall-mount, DIN rail mount

Package Included:
- 1 x Fiber Optic to CAN Module