Nooploop UWB Positioning Module 4.0G 4.5G 2000m Indoor Outdoor Ranging (LinkTrack P-BP Single Module)

Description:
LinkTrack is a PNTC (positioning, navigation, timing and communication) local positioning system based on UWB technology. It supports 1D, 2D and 3D positioning, 1D and 2D typical positioning accuracy is 10cm, and 3D typical positioning accuracy is 30cm; it also supports 40 tags and 120 base station positioning. Support distributed ranging and data transmission, realize cluster formation without geographical restrictions; support pure data transmission mode, bandwidth up to 3Mbps.

Features:
Advantages
* 10cm Typical Positioning Accuracy
* 200 Default Node Capacity
* 200Hz Maximum Refresh Rate
* 2000m Longest Distance
* 3Mbps High-Speed Data Transmission
* Based on UWB (Ultra Wideband) communication technology
* Integration of positioning, navigation, timing and communication
* Three modes: local positioning, distributed ranging, and digital transmission
* The same hardware can be flexibly configured for different roles such as tag and anchor
* High capacity: 40 tags / 120 anchors / 1 console
* High-speed low-latency data transmission mode, bandwidth up to 3Mbps
* Automatic networking with each other
* One-Key calibration coordinates of anchors
* Wireless parameter configuration and firmware upgrade
* Fake GPS support, output NMEA-0183 protocols
* Built-in three-axis gyroscope, three-axis accelerometer
* Multi-band, adjustable transmission gain

One-Key Calibration
* For the convenience of users, only needs to send the command to any anchor or console in the system, the system will automatically complete the calibration of the anchor and save the configuration. It is really easy to deploy and get started quickly.

Fake GPS
* The LinkTrack UWB positioning system supports NMEA-0183 protocol, you can directly replaces the GPS in you target with the positioning tag. Without any secondary development, you can obtain higher positioning accuracy and refresh frequency than GPS.

ROS Support
* Connect to any positioning node, run LinkTrack ROS node, you can subscribe to real-time positioning information, without processing the underlying communication and data analysis, making it possible for ROS developers to achieve high-precision positioning and navigation of robots quickly.

Three Modes
* LP Mode: LP Mode supports positioning, navigation, time service and communication working at the same time. The roles are divided into tags, anchors and consoles. The tag measures the distance to the anchor and solves the coordinates and outputs it in real time through the communication interface, and the navigation function can be realized after connecting to the robot, UAV and other carriers. The anchor and console synchronously output all tag positioning information in real time, and access the terminal display platform to realize the positioning (monitoring) function. At the same time of positioning, the tag and anchor/console support two-way data transmission communication to realize the communication function. Each tags output contains a unified system time for synchronous timing. Typical 1 and 2 dimensional positioning accuracy 10cm, typical 3rd dimensional positioning accuracy 30cm; When the positioning frequency is 200Hz, the delay is only 5ms; The anchor capacity is up to 120, and the tag capacity is open by default to 200.
* DR Mode: DR Mode supports the integration of ranging, timing and communication, with only one role of node. Each node measures the distance to other nodes in real time, and receives data from other nodes. At the same time, it can also transmit its own data to other nodes through the communication interface to achieve ranging and communication functions. The output data content of each node contains a unified system time to achieve synchronous time service. The typical ranging accuracy is 10cm, and when the refresh frequency is up to 200Hz, the delay is only 5ms; at the 10Hz output, the node capacity is up to 50.
* DT Mode: DT Mode supports three sub-modes of intelligent communication, two-way communication and broadcast communication. There are two roles of master and slave in this mode. Under DT Mode, high-speed, low-latency wireless data transmission can be achieved. The data transmission bandwidth is up to 3Mbps, and the delay is less than 0.5ms.

Software
* Data Visualization: Support real-time multi-channel data waveform, two-dimensional and three-dimensional trajectory, attitude and other data presentation forms
* Data Recording And Playback: Support real-time data recording, subsequent data files can be played back in the software, convenient playback control bar is provided, and data can be exported within a specified time interval for subsequent analysis using other tools.
* Multi-Window And Resource Customization Function: Strong interface custom layout ability, and convenient configuration of visual resources to meet user needs as much as possible
* Multi-Platform Support: Synchronous support for Windows, Ubuntu and MacOs, convenient debugging

Solutions
* Mobile Robot Navigation: Robots, unmanned vehicles, drones and other vector navigation and positioning.
* Centralized Cluster Formation: UAV formation performance, unmanned fleet array, multi-robot simulation battle, etc.
* Decentralized Cluster Formation: Swarm drone formation, swarm unmanned vehicle formation, etc.
* Motion Track Record: Athlete trajectory monitoring, automatic tracking lights, etc.
* Auto Follow System: Automatic follow spot lights, stage performances, figure skating, etc.
* Ranging And Collision Avoidance System: Anti-collision of forklifts, cranes, port trucks, etc.
* Geological Hazard Monitoring: Landslide monitoring, soil pit collapse monitoring, bridge deformation monitoring and early warning, etc.
* AR/VR Interaction: AR, VR and other multi-person interactive scene positioning.

Optional Versions:
* LinkTrack P-B Single Module (Tag & Base Station Compatible)
* LinkTrack P-BS Single Module (Tag & Base Station Compatible)
* LinkTrack P-BS2 Single Module (Tag & Base Station Compatible)
* LinkTrack P-BS3 Single Module (Tag)
* LinkTrack P-BS4 Single Module (Tag)
* LinkTrack P-BC Single Module (Tag & Base Station Compatible)
* LinkTrack P-BT2 Clip-on Tag
* LinkTrack P-BP Single Module (Tag or Base Station)
* LinkTrack P-B Ready-to-use Kit (Tag & Base Station Compatible)
* LinkTrack P-B Standard Kit (Tag & Base Station Compatible)

Packing List (Depending on Selected Version):
LinkTrack P-B Single Module (Tag & Base Station Compatible):
* 1 x LinkTrack P-B
* 1 x GH1.25 4P adapter cable
* 1 x USB Type-C data cable

LinkTrack P-BS Single Module (Tag & Base Station Compatible):
* 1 x LinkTrack P-BS
* 1 x GH1.25 4P adapter cable

LinkTrack P-BS2 Single Module (Tag & Base Station Compatible):
* 1 x LinkTrack P-BS2
* 1 x GH1.25 4P adapter cable

LinkTrack P-BS3 Single Module (Tag):
* 1 x LinkTrack P-BS3

LinkTrack P-BS4 Single Module (Tag):
* 1 x LinkTrack P-BS4

LinkTrack P-BC Single Module (Tag & Base Station Compatible):
* 1 x LinkTrack P-BC

LinkTrack P-BT2 Clip-on Tag:
* 1 x LinkTrack P-BT2
* 1 x USB Type-C data cable

LinkTrack P-BP Single Module (Tag or Base Station):
* 1 x LinkTrack P-BP

LinkTrack P-B Ready-to-use Kit (Tag & Base Station Compatible):
* 6 x LinkTrack P-B modules
* 6 x GH1.25 4P adapter cables
* 6 x USB Type-C data cable
* 6 x Suction Cups
* 4 x Tripods
* 4 x 20000mAh Power Banks

LinkTrack P-B Standard Kit (Tag & Base Station Compatible):
* 11 x LinkTrack P-B modules
* 11 x GH1.25 4P adapter cables
* 11 x USB Type-C data cable
* 6 x Suction Cups
* 6 x Tripods
* 6 x 20000mAh Power Banks
* 2 x USB to TTL modules
* 1 x Protective case

Packaging Details:
* Package weight: 0.38kg