Open Source Geiger Counter Kit Geiger Counter Nuclear Radiation Detector Assembled For γ β Rays

Open Source Geiger Counter Kit Geiger Counter Nuclear Radiation Detector Assembled For γ β Rays

Geiger Tube Parameters:
- Technical parameters: diameter 10±0.5mm
- Total length: 90±2mm
- Starting voltage: < 350V
- Recommended operating voltage: 380V
- Minimum plateau length: 80V
- Maximum plateau slope: 10%/80V
- Operating voltage limit: 550V
- Maximum background counting rate: 25 times / min
- Lifespan: > 1 x 10^9 pulse
- Medium temperature: -40℃ to 55℃

System Parameters:
- Powered by 5V power supply or by 3x 1.5V batteries; 4x 1.2V batteries, current: 12mA-30mA (batteries are not included)
- For the detection of 20mR/h ~ 120mR/h of gamma rays and 100 ~ 1800 off
variables / points / cm 2 of the soft beta ray.
- Sound and light alarm
- Interrupt output interface: Through this interface, the module can be connected to a MCU and then displayed on the LCD.
- Fit for Arduino
- Size: 118 x 63mm
- N.W.: 150g

Compatibility:
- Supports most Geiger tubes, including M4011, STS-5, SBM20 and J305. Geiger tubes with 330-600V operating voltage are supported.
- Support a computer (host) to collect data, Matlab analysis and processing.
- Support for Arduino: It supports for Arduino UNO R3 and others with 5V and external interrupt INT. Please search for Arduino SPI example for Radiation Logger and download from the Internet. Logger Radiation can be used as the host computer software to build radiation monitoring station.

Package Included:
- 1 x Finished Geiger Counter
- 1 x Geiger Tube (J305 or M4011)
- 1 x Power Cable

Note:
- It is assembled and ready for use.
- Batteries are not included in the package.
- Please contact us for user manual and relevant schematic diagram after purchasing.