PJ260K Rapid Descent Device 0-24M/min 260KG Load Lift Descender Self-locking Multifunctional Ascender for 12-14MM Ropes

Safety Reminder:
- It is strictly prohibited to use this product without the safety rope and anti fall device.
- It is strictly prohibited to use an electric wrench to impact and drive this product.
- It is recommended to use polyester rope, and the pulley size should be selected according to the rope diameter.

Introduction:
- The three functions of electric ascent, electric descent, and manual descent are convenient for precise positioning of the lifting height through micro adjustment.
- One handed control, directional change, convenient for the other hand to easily control the anti fall device or object.
- Loading and unloading ropes midway, without disconnecting from the main lock and opening the cover plate, effectively preventing loss of control at high altitude.
- Follow the principle of sudden death during high-altitude rope operations, and release your hand at any time to lock or slowly lower to prevent falling.
- Focused on safety and durability, the load-bearing body is made of thick and sturdy stainless steel.
- High speed ratio gearbox, universal interface for electric drill and hammer, easy to drive heavy loads of 260Kg.

PJ Series Characteristics:
- Handle speed reduction, sensitive speed regulation (linear speed regulation 0-2 meters/second), stop immediately upon release.
- Panic self-locking, offline self-locking of electric drills, no need to pull or lock ropes, fully anti fall throughout the process.
- Recommended scenarios: preferred for manned operations, such as rapid lifting, rock climbing, exploration, etc.

Principle of Sudden Death:
- The principle of sudden death is the first safety principle for high-altitude operations.
- This principle stipulates that in the rope system, the safety of personnel should not be affected by any unexpected situation of the operator. Including operational errors, sudden fainting, accidental release, etc. that directly lead to personnel falling or system safety failure. Require the equipment to remain safe and stable at all times, and to be able to lock the ropes even if released, without causing serious injuries such as loss of speed or falling from heights.
- The PJ series is equipped with an automatic brake mechanism internally, which complies with the first safety principle for high-altitude operations. When the following abnormal situations occur, it can automatically achieve self-locking parking to ensure the safety of operators.
1. Misoperation, the operator excessively pulled the descent handle due to panic.
2. Suddenly hands relief, during the entire process of high-altitude operations, the operator suddenly loses consciousness.
3. Accidentally detached, during manual descent, the operator accidentally pulled the rope and accidentally disconnected the drill.
- Special note: PJ does not rely on rope friction to control the descent speed, and there is no risk of rope friction heating. The operator does not need to wrap or pull the rope, and can directly adjust the speed linearly by pulling the handle.

PJ260K Parameters:
- Main function: electric ascent, electric descent, manual descent
- Allowable load: 50kg (minimum); 200kg (rated); 260kg (max)
- Speed: 0 - 24m/min for electric drive; 0 - 60m/min for manual descending (linear speed regulation)
- Rope diameter: 12 - 14mm
- Self net weight: 3kg
- Electric hand drill torque: >100NM (no impact allowed)

Package Included:
- 1 x Descender

Using Instruction:
- Three functions of lifting and descending: electric drill lifting, electric drill descending, and manual descending.
- Finger dial reversing, electric drill lifting conversion does not require plugging or unplugging the electric drill, and can be raised and lowered at a micro distance.
- Adjustable speed descent device, the operating handle can linearly adjust the descent speed, automatically reset and stop upon release.
- One handed control, easy to control objects with the other hand, such as anti fall device.
- Full process anti fall protection, the electric drill is offline at any time, and the machine locks and stops.
- Automatic braking. This product follows the principle of sudden death. If the operator loses consciousness or accidentally loses control of the rope or drill, it will automatically lock and stop.
- The braking performance of this product is related to the load capacity. Before each use, the braking performance and manual lowering performance should be verified at a safe height. If necessary, the brake screws can be adjusted to ensure that the static load does not slide.
- This machine should be regularly maintained and oiled.