PS-25A 220V to 13.8V 25A DC Regulated Power Supply Switching Power Supply for Shortwave Mobile Radio

PS-25A 220V to 13.8V 25A DC Regulated Power Supply Switching Power Supply for Shortwave Mobile Radio

Features:
- Using switching-mode technology (27Khz)
- High efficiency: over 85%
- Good load and line regulations
- Output with noise filter and short-circuit protection
- Exceptionally immune to radio frequency interference
- Output OVP (over-voltage protection) and OCP (over-current protection)
- Output with back light V/A meter display
- Forced air cooling fan
- POWER switch to turn it on/off

Specifications:
- Model: PS-25A
- Input voltage range: 200-240V (50/60Hz)
- Output voltage: 13.8V±0.1V
- Max. Output current: 25A
- Continuously output current: 20A
- Line regulation: ≤ 50mV ( ±10% change)
- Load regulation: ≤ 100mV (0-100% load)
- Ripple & noise: ≤ 50mVp-p 5mVrms
- Efficiency: over 85%
- Meter: output voltage and current meter
- Dimensions: 195 x 280 x 85mm/7.7 x 11 x 3.3" (WxDxH)
- Weight: 2.3kg/5.1lb

Package Included:
- 1 x Main unit
- 1 x Power cable

Precautions:
1. Before replacing its fuse, the cause must be found out and the problem can be removed. When replaced, the fuse of the original specification current value (5A) must be used. It is not allowed to use a cable to replace the fuse.
2. Please use our power cable or a three-pin power cord of the same type, and the power outlet must be well installed with the ground wire.
3. The machine is only suitable for radio transceivers, and it cannot be used to power lamps  or electric equipment.
4. There is high voltage in this machine and it is strictly forbidden to open the cover of the machine to prevent electric shock.
5. It should be placed in a well-ventilated place and avoid strong vibration.