Large Format Printer Digital Servo Motor Driver MCDC505 DC Motor Driver(with DSP)

Large Format Printer Digital Servo Motor Driver MCDC505 DC Motor Driver(with DSP)
Product Description
- MCDC505 all-digital DC servo drive system adopts high-performance digital signal processor (DSP) and integrated circuit, and come out to be a cost effective product with simple circuit, high integration, easy operation, and strong practicability. - - MCDC505 provide three feedback loops: position loop, velocity loop and current loop. Three work control mode: position, velocity and torque. McDC505 matches with DC servo motor under 50V and 200W.

Product Feature
- Position control: light isolate input PULSE/DIRECTION; 
- 'Speed control: input simulate 0-3.3V voltage signal (speed input by Pos.ff);
- Torque control: input simulate 0-3.3V voltage signal (torque input by Pos.ff);
- Width of current loop (-3dB) 2KHz (standard); 
- Width of velocity loop: 500 Hz (standard); 
- Width of position loop: 200 Hz (standard); 
- Perfect protection against overload, I2T, over-voltage, over current, overheating, short circuit, circuit interruption, chip damage; 
- Green light for on, red light for protected mode or offline.

Product Specification/Models
- Input DC voltage range 24—50v(standard); 
- Continuous Output power:200W;
- Continuous output current:6A 32KHz PWM; 
- Overload output current: 18A(3s);
- Protection: Over current initiated peak value: 30A±10%;
- Overload I2T current initiated value: 300% 5s; 
- Overheating initiated value: 80℃; 
- Over voltage initiated value: 65 v; 
- Under Voltage initiated value: 18V; 
- Maximum pulse input frequency:300K;
-  Maximum RS232C speed: 19.6Kbps (an extra transfer interface require 
- Working environment: No dust, no oil mist and no corrosive air; 
- Working temperature: 0-+50℃;
- Storage temperature: -20--+80℃
- Humidity:40-90%RH;
- Cooling method: natural air cooling and forced air cooling;
- Dimension: 74 x 71 x 38 mm 
- Weight: about 120g