Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
---|---|---|---|---|---|
Price /Unit | $107.68 | $105.48 | $102.19 | $97.79 | Contact US |
LF77-AKZ250-USB3-NPN(B) Mach3 USB Interface Board 5-Axis CNC Controller Board Motion Controller for CNC Engraving Machines
Features:
- It has a USB interface and no driver is required.
- Support 5-axis linkage, 500KHz output at the same time, connected to servo/stepping. Any one axis can be configured as a pulse spindle.
- 2 real-time electronic handwheel (MPG) input ports, which can connect 2 electronic handwheels at the same time. When the MACH3 electronic handwheel is set in Multi-Step mode, it has the same real-time performance as the CNC machining center, and runs smoothly. There is no delay in the control board, and the performance of the mechanical system is fully utilized.
- With real-time jog, there is no delay in the control panel, the motor responds quickly and quickly, and the experience is zero delay.
- 16 general digital input points, corresponding to 16 LED indicators. Customize the configuration function in MACH3. Support Mach3 spindle speed measurement function.
- 7 general-purpose digital output points, configurable as: spindle start/stop/coolant/custom M code VBasic programming control
- 1 PWM output point for analog spindle speed control: pulse width speed control / 0-10V inverter speed control.
- 2 analog inputs, used to adjust the processing speed / jog speed / spindle speed.
- 1 status indicator, which can indicate the USB connection, and the status of the motor is clear at a glance.
- Using 5 dual-channel 10Mhz high-speed optocouplers, 25 general optocouplers, a total of 30 optocouplers, isolate all input/output. The high-cost design provides complete anti-interference performance and complete safety protection.
- Without PC intervention, the signal is processed independently by the motion control board to ensure that you have real real-time and reliability.
- Support all versions of Mach3. Supports all versions (32-bit/64-bit). For Windows XP to Windows 10, and all Windows versions are plug and play.
- The chip firmware supports upgrades, and users can continuously get the latest function support.
- Provide a complete installation manual with clear documentation, illustrations and detailed descriptions.
- 16 input/7 output/5 axis/spindle speed control signals are all optically coupled and electrically isolated. Highly safe and reliable design.
- Environmentally-Friendly Copper Terminals: Axis output x 5 / general output x 7 / (0-10V) output x 1 / (0-5V) output x 1 / PWM output x1 / general NPN input x16 / power input
- Copper USB Socket:
- 5-axis output signal (direction signal + pulse signal): 10MHz high-speed optocoupler isolation x 10 channels
- Optocoupler isolation PWM spindle speed control signal output x 1 / Optocoupler isolation general output x 7
- 8-channel output driver chip, using high-quality round pin sockets, convenient for users to replace the chip
- Optocoupler isolated NPN input x16 / power input
- 2 groups of power supplies: BUCK switching power supply + LDO low dropout linear power supply
- Tantalum capacitor + self-recovery fuse + anti-reverse diode + TVS anti-surge diode
- USB cable (Accessory: USB cable x 1.5M, 7mm magnetic ring x 2)
- External magnification knob
- Wiring of Controller Board & Laptop
- Schematic Diagram: USB main control chip + external magnification knob x 2
- 10MHz high-speed optocoupler isolation x 10 channels + optocoupler isolation PWM spindle speed control signal output x1
- Optocoupler isolation NPN input x 16 + Optocoupler isolation general output x 7
- DCDC Power Supply + LDO Power Supply
- Download information:
http://leafboy77.com/
http://leafboy77.com/files/usb_eth_edg381/Mach3_USB_Motion_Board_AKZ250V3_NPN(B)_Manual.zip
http://leafboy77.com/files/usb_eth_edg381/eMotionMach3.zip
http://www.machsupport.com/software/mach3/
Package Included:
- 1 x Controller Board