MATEKSYS H743-WING Drone Flight Control With OSD BEC For RC FPV Multi-rotor Fixed Wing Drones

MATEKSYS H743-WING Drone Flight Control With OSD BEC For RC FPV Multi-rotor Fixed Wing Drones

FC Specifications:
- MCU: STM32H743VIT6, 480MHz, 1MB RAM, 2MB Flash
- IMU: MPU6000 (SPI1) & ICM20602 (SPI4)
- Baro: Infineon DPS310 (I2C2)
- OSD: AT7456E (SPI2)
- For Blackbox: MicroSD card slot (SDIO)
- 7x Uarts (1, 2, 3, 4, 6, 7, 8) with built-in inversion
- 13x PWM outputs (including LED pad)
- 2x I2C
- 1x CAN
- 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator (Red)
- 1x SPI3 breakout
- Dual Camera Inputs switch
- 5V/9V (12V) for Camera/VTX power switch
- High-precision Current Sense
- ADC VB2 voltage divider: 1K:10K
- ADC AirSpeed voltage divider: 10K:10K
- For INAV TR/SA VTX control: Yes
- Beeper : Yes
- RSSI: Yes
- Analog Airspeed sensor: Yes
- Digital Airspeed sensor: Yes
- Static power 160mA at 5V

FC Firmware:
- For ArduPilot (for ChiBiOS): MATEKH743
- For INAV: MATEKH743 (To be supported soon)
- For BetaFlight: MATEKH743

PDB:
- Input voltage range: 9~36V (3~8S LiPo) w/TVS protection
- 2x ESC power pads
- Voltage Sensor: 1:10 (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 for ArduPilot)
- Current Senor: 132A, 3.3V ADC (Scale 250 in INAV, 40 A/V for ArduPilot)
- Sense resistor: 60A continuous, 132A burst

BEC 5V output:
- Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
- Continuous current: 2 Amps, Max.3A

BEC 9V /12V output:
- Designed for Video Transmitter, Camera, Gimbal, etc.
- Continuous current: 2 Amps, Max. 3A
- 12V option with jumper pad

BEC Vx output:
- Designed for Servos
- Voltage adjustable, 5V Default, 6V or 7.2V via jumper
- Continuous current: 8 Amps, Max. 10A

BEC 3.3V output:
- Linear Regulator
- Continuous current: 200mA

Physical:
- Mounting: 30.5 x 30.5mm, diameter 4mm, with Grommets diameter 3mm
- Dimensions: 54 x 36 x 13 mm
- Weight: 30g with USB extender

Including:
- 1 x H743-WING
- 1 x USB/Beep Extender
- 1 x 20CM SH-4P To GH-4P Cable For CAN Port
- 1 x 20CM SH-6P To SH-6P Cable For USB Extender
- Dupont 2.54 Pins

Note:
- Battery is not included.
- Other items pictured are not included in the package, for demonstration purposes only. Thank you for your understanding!