• Mini CC3D Revolution Flight Controller+Oplink Telemetry 433MHZ+OP GPS+Distribution Board Kit for Multicopter FPV
  • Mini CC3D Revolution Flight Controller+Oplink Telemetry 433MHZ+OP GPS+Distribution Board Kit for Multicopter FPV
  • Mini CC3D Revolution Flight Controller+Oplink Telemetry 433MHZ+OP GPS+Distribution Board Kit for Multicopter FPV
  • Mini CC3D Revolution Flight Controller+Oplink Telemetry 433MHZ+OP GPS+Distribution Board Kit for Multicopter FPV
  • Mini CC3D Revolution Flight Controller+Oplink Telemetry 433MHZ+OP GPS+Distribution Board Kit for Multicopter FPV

Mini CC3D Revolution Flight Controller+Oplink Telemetry 433MHZ+OP GPS+Distribution Board Kit for Multicopter FPV

Availability: In stock, usually dispatched in 1 business day

  • Price:$79.63
  • Price in reward points: 796 Reward Points: 8
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $78.04 $76.44 $74.06 $70.87 Contact US
Quantity:

Mini CC3D Revolution Flight Controller+Oplink Telemetry 433MHZ+OP GPS+Distribution Board Kit for Multicopter FPV

Mini CC3D Revolution Flight Controller Specifications:

- STM32 F4 Microcontroller
- MPU-6000 Gyro/Accelerometer
- MS5611 Barometer
- Main port
- Flexi Port (serial or I2C port)
- RC input port
- PWM output port
- Flexiport
- PW/Sonar port
- Telemetry port
- Comes with Case
- Size: 30mm x23mm x9mm.
- Weight: 6g (includes case)

OP GPS:

Oplink mini Air
- Dimensions:34mm x19.5mm x10.5mm (included case)
- Frequency:433mhz
- Input Voltage: +5v

Oplink mini ground
- 100mw Standalone Radio Modem
- 3 IO Ports: Micro-B USB, Mainport & Flexiport
- Dimensions: 38mm x23mm x10mm (included case)
- Input Voltage: +5v
- Frequency:433mhz

Specification:
- Size: 26mm*21mm
- Weight: 8g
- Wire length: 15cm
- OP GPS suitable for CC3D Series , the plug is CC3D Original

Connection diagram:
- Black to GND
- Red to +5V
- Blue to TX
- Orange to RX

Note: Because of the super mini size ,there is no LED on the GPS, so you'd better use with OSD. This is OP GPS interface that is suitable for CC3D Revolution.

Distribution Board:

Description:
- Two BEC output, 5V and 12V, voltage input:  2-6S
- With metal shielding shell to reduce signal interference greatly  
- Maximum current : 3A BEC
- Weight: About 7g
- Size:36mm*36mm
- The hole and size is same as RC panel CC3D
- The voltage for 12V BEC needs at least 4S, if 3S, the BEC is not necessary.
- This board is with chip TI. The thickened copper adds the stability,
- The shielding case prevents the interference and make sure the power supply is stable.

Package included:
- 1 x Mini CC3D Revolution Flight Controller w/case
- 1 x Oplink mini Air
- 1 x Oplink mini ground
- 2 x Antenna
- 1 x OP GPS  
- 1 x CC3D Flight Controller Distribution Power Board
- Connection lines
 

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha