| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $133.79 | $131.06 | $126.96 | $121.50 | Contact US |
M5Stack Paper S3 E-Paper Display Touchable Low Power Consumption 4.7-inch E-ink Display Development Kit ESP32S3
$87.42
LILYGO Grey Shell Version T-Display-S3 1.9-inch LCD Display Development Board WiFi Bluetooth5.0 Wireless Module for Arduino
$32.47
Sketchboard Mechanical Arm Plotter Robot Arm Students Programming Learning DIY Kit for Arduino
$44.05
OK6410-B S3C6410 Board + 4.3" LCD (256M RAM 2GB FLASH)
OK6410-B ARM11 development board bundled with a 4.3" TFT LCD. Samsung S3C6410 MCU, 256MB DDR RAM, 2GB NAND Flash, WinCE / Linux / Android / uCos-II support, advanced Video / graphic support with 3D acceleration.
Features & Specifications:
- Samsung S3C6410 microcontroller based on the ARM1176JZF-S core, main frequency @ 533/667MHz
- 256MB Mobile DDRram
- 2GB NAND Flash
- 12MHz,48MHz,27MHz,32.768KH clock source
- 5V power supply adaptable
- One reset button implemented with specific reset chip
- 8-bit toggle switch for selecting boot mode
- Four serial ports, including 1 5-wire RS232 and 3 3-wire TTL
- One 100M Ethernet port with DM9000AE and indicators
- One USB Host interface supporting USB1.1 protocol
- One USB Slave (MINI-USB) interface supporting USB2.0 protocol
- One high-speed SD card slot supporting SD Memory and SDIO
- One WIFI expansion interface
- Stereo audio I/O sockets
- LCD and touch screen interface supporting 3.5", 4.3", 5.6", 5.7", 7"TFT LCD
- One CVBS output interface (PAL/NTSC)
- One CMOS camera connector supporting ITU-R BT601/656 8-bit mode
- Built-in RTC (Real Time Clock) with back-up battery
- One JTAG interface using 2*10pin connector
- One Infrared receiver
- Four user LEDs
- One Buzzer
- 2 x SPI channel
- 2 x DA
- 8 x AD
- 7 x interrupt
- 38 x GPIO
- IIC interface
- Dimension: 81 x 105mm
- Working Temperature: -20 to 70°c
- 4.3" LCD
| BootLoader | U-BOOT-1.1.6, supporting USB2.0 download. 100% open source. | |
| Embedded Linux | kernel | Linux 2.6.28 and Linux2.6.36, 100% open source |
| BootLoader | U-BOOT-1.1.6 | |
| Filesystem | cramfs and yaffs2 provided | |
| Grapical Interface | Qtopia 2.2.0, Qtopia 4.4.3 and QT4.7 available | |
| Drivers |
| |
| Hardware Acceleration |
| |
| Demo Applications |
| |
| Ethernet support |
| |
| LCD support | wide resolution support: 320x240,480x272,640x480,800x600,1024x768 | |
| Cross Compilers | arm-linux-gcc-4.2.2-eabi | |
| WinCE | Version | WinCE 6.0 R3 (BSP provided as source code) |
| BootLoader | E-BOOT supporting USB2.0 download | |
| Drivers |
| |
| Hardware Acceleration |
| |
| Demo Applications |
| |
| Video support | wide resolution support: 320x240,480x272,640x480,800x600,1024x768 | |
| Android | Version | Android-2.3.3 |
| Bootloader | U-boot-1.1.6, source code provided | |
| Kernel | Linux-2.6.29 | |
| Driver Support |
| |
| Applications |
| |