Original New PM-L45-P Groove Type Photoelectric Switch Sensor PNP Output 4-Core 1M Cable for Panasonic

Original New PM-L45-P Groove Type Photoelectric Switch Sensor PNP Output 4-Core 1M Cable for Panasonic

Specification:
- Model: PM-L45-P
- Detection distance: 6mm (fixed)
- Output action: illuminated ON / Shading ON (2 kinds of output)
- Power voltage: 5 ~ 24VDC
- Cable: 4-core 1m cable
- Projection element: IR LED (wavelength: 855mm, non-modulated)
- Minimum detection object: 0.8 x 1.2mm opaque object
- Complies with CE marking directives: EMC directive, RoHS directive
- Difference: 0.05mm below
- Repetition accuracy: 0.01mm below
- Power voltage: 5VDC ~ 24VDC±10%, pulse P-P 10% below
- Power consumption: 15mA below
- Output: PNP
  Maximum output current: 50mA
  External voltage: 30VDC below
  Residual voltage: 2V below (outflow current 50mA), 1V below (outflow current 16mA)
- Protection: short-circuit protection
- Response time:
  Illuminating: 20us below
  Shading: 80us below
  Note: the maximum response frequency is 3kHz.
- Working status indicator: orange LED (light on for illuminating)
- Staining degree: 3
- Protection structure: IP64 (IEC)
- Working temperature: -20 ~ +55℃ (non-condensing); storage temperature: -30 ~ +80℃
- Working humidity: 5 ~ 85%RH; storage humidity: 5 ~ 95%RH
- Illumination: fluorescent lamp: 1000 lux below
- Voltage resistance: AC1000V 1minute,
- Seismic resistance: 10 - 2000Hz; dual amplitude 1.5mm (maximum acceleration 196m/s²); 2 hours each for X, Y, Z directions
- Impact resistance: acceleration 15000m/s² (about 1500G), 3 times each for X, Y, Z directions
- Material: PBT for case; polycarbonate for display cover
- Cable: 0.09mm², 4-core, 1m
- Cable extension: 0.3mm² above cables can be extended to 100m. (Note: When the extension cable exceeds 20m, please confirm that the power supply voltage at one end of the sensor cable is above 4.5V.
- Weight: about 10g

Package Included:
- 1 x Photoelectric Switch