| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $55.39 | $54.26 | $52.56 | $50.30 | Contact US |
BPF-10.7M Bandpass Filter 10.7M+/-0.5M 50ohms High Quality RF Accessory with SMA Female Connector
$21.59
OC3-ADJ 75ohms 5.0Vpp 3-Channel Adjustable Frequency Standard OCXO 10K-150M High Quality RF Accessory
$134.75
OC3-ADJ 75ohms 3.3Vpp 3-Channel Adjustable Frequency Standard OCXO 10K-150M High Quality RF Accessory
$134.75
Power Splitter PD-0.5/6G-4S 500-6000MHz RF Power Splitter SMA Microstrip Power Divider 1 IN 4 OUT
Technical Parameters:
- Frequency range (GHz): DC-0.5-6G
- Insertion loss (dB) (including distribution ratio): ≤ 7.5
- Isolation: ≥ 15dB (at 500M-800MHZ); ≥ 20dB (at 800M-6000MHZ)
- Input Standing Wave (VSWR): ≤ 1.5
- Output standing wave (VSWR): ≤ 1.3
- Amplitude balance (dB): ≤ 0.3
- Impedance: 50Ω
- Phase balance (°): ±6
- Interface type: SMA-K
- Power Capacity (W): Forward: 10w (Avg.) and 100w (Peak); Reverse: 2w (Avg.) and 30w (Peak)
- Operating temperature: -20 to 80°C
- Dimensions: 59 x 57 x 14mm/2.3 x 2.2 x 0.6"
Package Included:
- 1 x RF Power Divider
Applications:
It is suitable for occasions where indoor GPS signals are not good but the GPS signal must be used for testing or experimentation, such as the positioning test of electronic equipment, including laboratories and mobile phones and tablet computers. It can be used for GPS signal splitting, Wifi signal splitting, RF signal power splitting and laboratory experiments.
