• STM32 Closed Loop 57 Stepper Motor Driver 6.35D Shaft Kit For 3D Printing Servo Stepping Mechaduino
  • STM32 Closed Loop 57 Stepper Motor Driver 6.35D Shaft Kit For 3D Printing Servo Stepping Mechaduino
  • STM32 Closed Loop 57 Stepper Motor Driver 6.35D Shaft Kit For 3D Printing Servo Stepping Mechaduino
  • STM32 Closed Loop 57 Stepper Motor Driver 6.35D Shaft Kit For 3D Printing Servo Stepping Mechaduino
  • STM32 Closed Loop 57 Stepper Motor Driver 6.35D Shaft Kit For 3D Printing Servo Stepping Mechaduino
  • STM32 Closed Loop 57 Stepper Motor Driver 6.35D Shaft Kit For 3D Printing Servo Stepping Mechaduino

STM32 Closed Loop 57 Stepper Motor Driver 6.35D Shaft Kit For 3D Printing Servo Stepping Mechaduino

Availability: In stock, usually dispatched in 1 business day

  • Price:$61.15
  • Price in reward points: 612 Reward Points: 6
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $59.93 $58.70 $56.87 $54.42 Contact US
Quantity:

STM32 Closed Loop 57 Stepper Motor Driver 6.35D Shaft Kit For 3D Printing Servo Stepping Mechaduino

Product Parameters:

- VCC: 12-30V (reference motor working voltage 24V)
- GND: power ground
- CLK: pulse input
- DIR: direction control (ground, reverse rotation)
- ENA: enable signal
- COM: Connect to 3.3V, common anode
- P2: one phase on each side of motor cable

Applicable Motor Parameters:
- Product name: 57 two-phase stepper motor
- Maximum speed: 1000 rpm (recommended load within 600 rpm)
- Step angle: 1.8°
- Static moment: 1.2N.m
- Driving voltage: 24V
- Motor length: 56mm
- Rated current: 3A
- Phase position: 2.5mH
- Rotor inertia: 300g.cm²
- Phase resistance: 0.9Ω
- Control method: pulse control
- Shaft length: 22mm

Application Scenario:
1. Fine closed-loop 3D printing
2. Optical precision aiming (laser, telescope, camera gimbal, etc.)
3. Speed cycle record player
4. Force feedback/impedance control robot
5. Force feedback of game controller
6. Adjustable mechanical impedance: virtual spring, damper, etc.
7. Electric transmission device between two axes such as CNC machine tool
8. Gravity elimination (for example: offset gravity torque on the robot arm, etc.)
9. Load detection and characterization (used as a balance)
10. Paper towel/TP dispenser
11. Variable load (brake, generator, etc.)
12. Valve control (automatic garden hose, etc.)

Package Included:
- 1 x Motor Driver Board Kit

Note: The product is installed and tested by professionals, and you can use it normally when you receive goods.

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha