| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $28.13 | $27.55 | $26.69 | $25.54 | Contact US |
AXera PI Zero Module 5MP AI-ISP Camera Module Designed with SoC Chip AX620Q+SC450AI Image Sensor
$67.98
0.5-inch 1024X768 OLED Driver Board High Quality Circuit Board for V760A-5 Wearable Head Mounted Display
$40.24
1PCS SFP+ Dual Mode Optical Module Small Form-factor Pluggable Transceiver Support 10Gbps Transmission with LC Interface
$26.09
Transparent Fuel Cell 1.8V - 2.3V Educational Electrolysis Module with Single Electrolysis Membrane Electrode
Specification:
- Electrode: Single electrolysis membrane electrode
- Size: 56.8 x 30 x 46.5mm
- Weight: 63g
- Electrolysis area: 25 x 25mm
- Electrolytic voltage: 1.8V - 2.3V
- Electrolytic performance (water temperature: 25℃): 2.1V at current > 1A; 2.3V at current > 3A
- AEW: Purified water
- Electrolytic service life: > 3000 hours
Using steps:
- Add purified water into the water tank, and the water will enter the positive pole of the electrolysis module from the water tank.
- Connect the power supply and start electrolysis. The best voltage range is 1.8V-2.3V.
Precautions:
- Use purified water or deionized water (you can use for Ipoh purified water, which is available in supermarkets)
- The positive and negative electrodes of the battery shall not be connected reversely
- The applied voltage shall not exceed 2.3V
- The maximum electrolytic water temperature is not higher than 70 ℃
- The water level of the water tank shall be higher than that of the electrolysis module.
- Dry burning without water is strictly prohibited, or it will burn out.
Note:
- Please keep the electrolyte membrane wet when not in use.
- Regularly replace the water in the water tank (replace it every 3 days or every 100 hours)
Package Included:
- 1 x Fuel Cell Module
