WAVE2 Portable Digital Oscilloscope 2 Channel 0-200KHz Signal Generator Assembled 2.4" Touch Screen

WAVE2 Portable Digital Oscilloscope 2 Channel 0-200KHz Signal Generator Assembled 2.4" Touch Screen

Features:
* X-Y channel display: WAVE2 is a dual-channel oscilloscope that can display the relationship between two signals departments, such as X-Y graphics, for Lissajous graphics, etc.
* Built-in signal generator: In addition to being a dual-channel oscilloscope, WAVE2 also has a built-in 0-20KHz (sine wave) DDS dual-channel function signal generator
* USB/battery powered: WAVE2 adopts two power supply modes: USB and battery (3.7-5V battery power supply. The current is 300mA and the battery is fully charged and can work continuously for 3 hours)
* Controlled via serial port: The oscilloscope and signal generator can be controlled through serial commands, which is easy to integrate with user system for automatic measurement
* Data transmission: The measurement data of WAVE2 can be output from the serial port in CSV format, which is convenient for uploading to PC for processing
* Color touch screen: WAVE2 uses a 2.4-inch TFT color touch screen, which is more conducive to carrying and working out
* CE certification: WAVE2 has passed the CE certification and the product is reliable

Specifications:
Oscilloscope:
* Analog bandwidth: 0-200KHz
* Number of channels: 2 channels
* Vertical sensitivity: 5mV/Div-20V/Div
* Sensitivity error: <5%
* The highest real-time sampling rate: 1Msps (each channel)
* ADC accuracy: 12Bit
* Record length: 1024 points
* Input impedance: 1MΩ
* Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
* Coupling mode: DC/AC
* Horizontal time base range: 10us/Div-500s/Div
* Trigger mode: automatic, regular and single
* Can be triggered by rising or falling edge
* Trigger source: CH1, CH2, external. External trigger voltage range: 0-15V
* The waveform display can be frozen at any time (HOLD function)
* Comes with 3.3V square wave test signal
* Display parameters: frequency, period, duty cycle, maximum, minimum, average, peak-to-peak value and effective value of voltage
* Save/recall the waveform, the waveform does not disappear when turned off
* Save/Up to 4 sets of collected waveform data
* Serial output of collected data
* Serial port format: LVTTL, 115200bps, 8N1

Signal generator:
* Number of channels: 2 channels
* Output signal types: sine wave, square wave, sawtooth wave, step wave
* Frequency range: 0-20KHz (sine wave)
* Amplitude range: 0-3V (peak)
* Duty cycle: 0-100%
* Phase: -360~360 degrees
* Offset: 0V or +3.3V

Package Included:
* 1 x Set of Digital Oscilloscope Signal Source